Parallax Instruments
57 products
-
Parallax 10" OD Tubes [PA-ODT10]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 10" OD Tube Rings
These 10" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 100mm OD Tubes (Orion ED80 and ED100) [PA-ODT100]
$142.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 100mm OD Tubes (Orion ED80 and ED100)
-
Parallax 10.3" OD Tubes (Celestron C-9.25) [PA-ODT103]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 10.3" OD Tube Rings (Celestron C-9.25)
These 10.3" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 11" OD Tubes [PA-ODT11]
$306.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 11" OD Tube Rings
These 11" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 114mm OD Tubes (102 ED/APO, Takahashi FS-102 and FSQ-106, 4" Unitron) [PA-ODT114]
$142.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 114mm OD Tubes (102 ED/APO, Takahashi FS-102 and FSQ-106, 4" Unitron)
-
Parallax 11.63" OD Tube (Meade 10" SCT, Meade SN-10 Newtonian) [PA-ODT1163]
$306.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax -11.63" OD Tube (Meade 10" SCT, Meade SN-10 Newtonian)
These 11.63" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 11.69" OD Tubes (AT 10 RC) [PA-ODT1169]
$328.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax -11.69" OD Tubes (AT 10 RC)
These 11.69" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 11.75" OD Tubes (Meade 10" SCT, Deep Sky Instruments RC-10) [PA-ODT1175]
$328.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 11.75 OD Tube Rings (Meade 10" SCT, Deep Sky Instruments RC-10)
These 11.75" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 12" OD Tubes (Celestron C-11, Vixen 260) [PA-ODT12]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 12" OD Tube Rings (Celestron C-11, Parks 10" Newtonian, Meade 10" SCT)
These 12" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 125mm OD Tubes Takahashi FSQ-106ED, New TSA-120" [PA-ODT125]
$195.50 USD2 in stock specialorderScheduled DeliveryParallax Instruments: Parallax 125mm OD Tubes Takahashi FSQ-106ED, New TSA-120"
-
Parallax 12.7" OD Tubes (Meade 10" Starfinder) [PA-ODT127]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 12.7" OD Tube Rings (Meade 10" Starfinder)
These 12.7" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 12" OD Extra Heavy Duty Tube Rings for 10"-12" Refractors [PA-ODT12HD]
$497.60 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 12" OD Extra Heavy Duty Tube Rings for 10"-12" Refractors
These 12" outside diameter split tube rings are made of extra heavy die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 13" OD Tubes (Celestron RASA) [PA-ODT13]
$349.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - Parallax 13" OD Tubes (Celestron RASA)
These 13" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 130mm OD Tubes (Explore Scientific 127 ED Aluminum Tube) [PA-ODT130]
$195.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 130mm OD Tubes (Explore Scientific 127 ED Aluminum Tube)
-
Parallax 13.6" OD Tubes (Meade 12" SCT) [PA-ODT136]
$328.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 13.6" OD Tube Rings (Meade 12" SCT)
These 13.6" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 14" OD Tubes [PA-ODT14]
$412.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 14" OD Tube Rings
These 14" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 14.17" OD Tubes (AT 12 RC) [PA-ODT1417]
$434.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 14.17" (AT 12 RC)" OD Tube Rings
These 14.17" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 145mm OD Tubes (Takahashi FS 128) [PA-ODT145]
$232.60 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 145mm OD Tubes (Takahashi FS 128)
-
Parallax 146mm OD Tubes (Explore Scientific 127 ED Carbon Fiber Tube) [PA-ODT146]
$232.60 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 146mm OD Tubes (Explore Scientific 127 ED Carbon Fiber Tube)
-
Parallax 15" OD Tubes [PA-ODT15]
$487.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 15" OD Tube Rings
These 15" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 150.1mm OD Tubes (TEC 140 APO) [PA-ODT1501]
$190.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 150.1mm OD Tubes (TEC 140 APO)
-
Parallax 15.3" OD Tubes (Celestron C-14) [PA-ODT153]
$497.60 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 15.3" OD Tube Rings (Celestron C-14)
These 15.3" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 155mm OD Tubes (Takahashi FS 152, Takahashi TOA-130) [PA-ODT155]
$216.70 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 155mm OD Tubes (Takahashi FS 152, Takahashi TOA-130)
-
Parallax 15.7" OD Tubes (MEADE 14" SCT) [PA-ODT157]
$518.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 15.7" OD Tube Rings (Meade 14" SCT)
These 15.7" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 16" OD Tubes [PA-ODT16]
$518.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 16" OD Tube Rings
These 16" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 16.4" OD Tubes (Parks 12.5" Newtonian) [PA-ODT164]
$518.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 16.4" OD Tube Rings (Parks 12.5" Newtonian)
These 16.4" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 17.5" OD Tube Rings (Meade 16" SCT) [PA-ODT175]
$593.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 17.5" OD Tube Rings (Meade 16" SCT)
These 17.5" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 179mm rings for Takahashi TOA-150 refractor [PA-ODT179]
$354.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 179mm rings for Takahashi TOA-150 refractor
-
Parallax 19" OD Tube Rings (Meade DS16A, 16" Starfinder) [PA-ODT19]
$591.94 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 19" OD Tube Rings (Meade DS16A, 16" Starfinder)
These 19" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 20.7" OD Tube Rings [PA-ODT207]
$613.14 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 20.7" OD Tube Rings
These 20.7" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 22.4" OD Tube Rings [PA-ODT224]
$613.14 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 22.4" OD Tube Rings
These 22.4" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 232mm OD Tubes (Takahashi E-180, Vixen Visac 200 Newtonian, AT 8 RC) [PA-ODT232MM]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 232mm OD Tubes (Takahashi E-180, Vixen Visac 200 Newtonian, AT 8 RC)
-
Parallax 26.4" OD Tube Rings [PA-ODT264]
$740.34 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 26.4" OD Tube Rings
These 26.4" outside diameter split tube rings are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 3" OD Tubes (TeleVue TV-85 Refractor) [PA-ODT3]
$121.30 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 3" OD Tubes (TeleVue TV-85 Refractor)
-
Parallax 4" OD Tubes (Genesis, Genesis SDF, TV-101, TV-102, NP-101, Orion ED80) [PA-ODT4]
$142.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 4" OD Tubes (Genesis, Genesis SDF, TV-101, TV-102, NP-101, Orion ED80)
-
Parallax 5" OD Tubes (TeleVue NP-127) [PA-ODT5]
$195.50 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 5" OD Tubes (TeleVue NP-127)
-
Parallax 5.5" OD Tubes (Astro-Physics 130 EDT, Meade 127EDT, Pentax 125) [PA-ODT55]
$211.40 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 5.5" OD Tubes (Astro-Physics 130 EDT, Meade 127EDT, Pentax 125)
-
Parallax 6" OD Tubes (D&G 5" Refractor) [PA-ODT6]
$190.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 6" OD Tubes (D&G 5" Refractor)
-
Parallax 6.5" OD Tubes (Astro-Physics 155 EDF Refractor) [PA-ODT65]
$200.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 6.5" OD Tubes (Astro-Physics 155 EDF Refractor)
-
Parallax 6.96" OD Tubes (Explore Scientific ES152 ED Carbon Fiber) [PA-ODT696]
$200.80 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 6.96" OD Tubes (Explore Scientific ES152 ED Carbon Fiber)
-
Parallax 7" OD Tubes ( Meade 152 ED, D&G 6" Refractor) [PA-ODT7]
$190.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 7" OD Tubes ( Meade 152 ED, D&G 6" Refractor)
-
Parallax 7.5" OD Tubes (Starfinder 6", Parks 6") [PA-ODT75]
$222.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 7.5" OD Tubes (Starfinder 6", Parks 6")
-
Parallax 75mm OD Tubes (Astro-Tech AT-66, Willam Optics ZenithStar 66 SD APO) [PA-ODT75MM]
$121.30 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 75mm OD Tubes (Astro-Tech AT-66, Willam Optics ZenithStar 66 SD APO)
-
Parallax 8" OD Tubes (Meade 178 ED, Astro-Physics 180 EDT, Takahashi MT - 160, Epsilon 160) [PA-ODT8]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 8" OD Tubes (Meade 178 ED, Astro-Physics 180 EDT, Takahashi MT - 160, Epsilon 160)
-
Parallax 8.9" OD Tubes (Celestron C-8) [PA-ODT89]
$243.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 8.9" OD Tubes (Celestron C-8)
-
Parallax 9" OD Tubes (D&G 8" Refractor) [PA-ODT9]
$243.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 9" OD Tubes (D&G 8" Refractor)
-
Parallax 9.1" OD Tubes (Meade 8" SCT) [PA-ODT91]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax 9.1" OD Tubes (Meade 8" SCT)
-
Parallax 9.5" OD Tubes (Starfinder 8") [PA-ODT95]
$243.20 USDspecialorderScheduled DeliveryParallax Instruments: Parallax Standard Tube Rings for Telescopes with an Outside Diameter of 9.5" (Starfinder 8")
-
Parallax 95mm OD Tubes (Takahashi FS - 78, Sky - 90, Takahashi FSQ-85) [PA-ODT95MM]
$142.50 USD1 in stock specialorderScheduled DeliveryParallax Instruments: Parallax 95mm OD Tubes (Takahashi FS - 78, Sky - 90, Takahashi FSQ-85)
-
Parallax 9.69" OD Tubes (Meade SN-8 Schmidt-Newtonian) [PA-ODT969]
$275.00 USDspecialorderScheduled DeliveryParallax Instruments: Standard Rings for 9.69" OD Tubes (Meade SN-8 Schmidt-Newtonian)
-
Parallax 10" Rotating Tube Rings (for PI 200 and 10" alum. tubes) [PA-RTR10]
$646.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 10" Rotating Tube Rings (for PI 200 and 10" alum. tubes)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 10" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 12" Rotating Tube Rings (for PI 250 and 12" alum. tubes) [PA-RTR12]
$646.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 12" Rotating Tube Rings (for PI 250 and 12" alum. tubes)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 12" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 15" Rotating Tube Rings (for PI 1320) [PA-RTR15]
$964.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 15" Rotating Tube Rings (for PI 1320)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 15" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 6.5" Rotating Tube Rings (MN-56) [PA-RTR65]
$540.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 6.5" Rotating Tube Rings (for MN-56)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 6.5" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 7" Rotating Tube Rings (Ceravolo HD145) [PA-RTR7]
$540.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 7" Rotating Tube Rings (Ceravolo HD145)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 7" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount,
-
Parallax 7.64" Rotating Tube Rings (MN-66) [PA-RTR764]
$540.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 7.64" Rotating Tube Rings (for MN-66)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 7.64" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.
-
Parallax 9.5" Rotating Tube Rings (for Parks 8" and Starfinder 8" Newtonians) [PA-RTR95]
$646.00 USDspecialorderScheduled DeliveryParallax Instruments: Parallax - 9.5" Rotating Tube Rings (for Parks 8" and Starfinder 8" Newtonians)
The most accurate way to re-position the eyepiece on EQ mounted Newtonians. Rotating tube rings eliminate balance and alignment problems when adjusting eyepiece position for optimal viewing comfort. A must with GoTo systems where alignment is so critical.
These 9.5" rotating tube rings are made of die-cast aluminum finished in gloss black paint. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.
The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.