Jump to content

Canada's top-tier Telescopes & Accessories
Be as specific as possible when reporting issues and *ALWAYS* include the full version number of the application you are using and your exact *CAMERA MODEL*
PLEASE READ ==> If you get a StructureMap or EdsInitializeSDK() error please RE-INSTALL before posting in the forum <==

Question

16 answers to this question

Recommended Posts

  • 0

It won't work.  It's not supported yet.

Please read the camera support grid for all supported camera model.  The link is in the page footer.

I just downloaded the Nikon SDK for the D6.  I'll try to recompile this weekend with it and upload a pre-prelease in the download pre-release section.

Regards,

Share this post


Link to post
Share on other sites
  • 0

Apologies for delay. Thanks for making the update and providing the download link. I tested tonight. It works partially. 

What works (1st screenshot below)

- Connect and Disconnect

- Changes to Shutter speed (Duration), ISO, & Aperture

- Image capture and download

What doesn't work (2nd screenshot)

- Frame and Focus:  the mirror in the camera does not click up, and the screen does not appear to be receiving an electronic live view signal (see screenshot below). When I click the F&F button again, it returns to image capture mode just fine.

50103157081_b13fbfd7f0_b.jpg

50102575643_f41e55787b_b.jpg

 

Please let me know if there is any other functionality you would like me to test. I only tested what I traditionally use on my other Nikons.

Share this post


Link to post
Share on other sites
  • 0

I got the log file, thank you. Is Liveview disabled on the camera?

2020-07-12 12:41:15,918 [Main] INFO  - Camera action fired: 'LiveviewStart'
2020-07-12 12:41:16,016 [Main] INFO  - CameraPropertyChangedArgs fired: Tv                   = '1'
2020-07-12 12:41:16,066 [Main] ERROR - [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapSet, 33342, kNkMAIDDataType_Unsigned, 1)
2020-07-12 12:41:16,066 [Main] ERROR -    at BinaryRivers.Camera.Nikon.Wrapper.NikonTaskQueue.Invoke(Delegate d, Object[] args)
   at BinaryRivers.Camera.Nikon.Wrapper.NikonBase.Set(eNkMAIDCapability cap, Object value)
   at BinaryRivers.Camera.Nikon.Wrapper.NikonDevice.set_LiveViewEnabled(Boolean value)
   at BinaryRivers.Camera.Nikon.CameraModel.DoMirrorFlipUp()
   at BinaryRivers.Common.Model.CameraModelBase.MirrorFlip(Boolean up)
   at BinaryRivers.Common.Model.CameraModelBase.Liveview(Boolean start, Boolean resume)
   at BinaryRivers.Common.Model.CameraModelNikonBase.Liveview(Boolean start, Boolean resume)
   at BinaryRivers.Common.Model.CameraModelBase.CameraPerformActionOnMessageRecieved(Object sender, MessageBusEventArgs`1 messageBusEventArgs)
 

Share this post


Link to post
Share on other sites
  • 0

I have used Live View multiple times in both photo and video modes. I even engaged it on my 2nd or 3rd attempt w/ F&F in BN to see if if the Live View image would appear in BN. There are only 2 settings in the Menu that are related to Live View:

- Custom D14 - Live view in continuous mode (On or Off)

- Photo Shooting Menu - Silent live view photography (On or Off)

I toggled these and they did not make a difference for F&F. 

I downloaded the D6 manual and searched on "Live View" to see if there were any other settings, but did not find any.

Share this post


Link to post
Share on other sites
  • 0

Not sure I follow. Do you mean a factory reset? The only settings I changed were for this test, and those were the 2 I referenced previously, plus identifying how I want the 2ndary XQD card used and back-button focus. No other settings were changed.

Share this post


Link to post
Share on other sites
  • 0
3 minutes ago, astroman133 said:

When you toggled the in-camera settings, did you disconnect and reconnect, or restart BYN?

No settings were made while connected to BN. I had shutdown BN when I researched the Nikon manual for anything associated with Live View. I then enabled both of those settings, started up BN, connected the camera, and tried F&F again. The enabled settings did not make a difference.

Share this post


Link to post
Share on other sites
  • 0

Try this...

Start BYN and to frame and focus.

Then enable live from the camera body.

  1. Is liveview displayed on the camera lcd screen
  2. Is liveview displayed in BYN

 

Share this post


Link to post
Share on other sites
  • 0
6 minutes ago, admin said:

Try this...

Start BYN and to frame and focus.

Then enable live from the camera body.

  1. Is liveview displayed on the camera lcd screen
  2. Is liveview displayed in BYN

 

I already did this in one of my attempts and it only displayed on the camera, not on BN (see above where I wrote:  "I even engaged it on my 2nd or 3rd attempt w/ F&F in BN to see if if the Live View image would appear in BN"). I will do it again and supply the log file.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

This site uses cookies to offer your a better browsing experience. You can adjust your cookie settings. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies, our Privacy Policy, and our Terms of Use