Nikon D810A

[wimbeerens]

 

Hello,

I am using a Nikon D810A with Backyard Nikon.

I have problems with the BULB function in the Imaging mode.

When I choose multible exposes with BULB then it takes just 1 picture and canceled the progres.

does anyone know how to fix this problem?

Thanks!!

[wimbeerens]

 

I fixed it! The Noise suppression was on.

So it was busy and Backyard Nikon stopped.

Thanks for the good help and support.

 

Greets from Holland.

[astroman133]

Are you using the latest  version (BYN 2.0.7). If not, please install the latest and let us know if you still have the issue.

[wimbeerens]

Yes I am using the latest version 2.0.7. 

And i still have the issue  

Thanks. 

Grz

[admin]

Send me the log file.

 

[wimbeerens]

Hi,

Here is the log file. 

Thanks!

logfile-[20170822-15h08m17s532]-[564]-2017-08-22.txt

[admin]

Thanks for the log file.

Your camera is reporting a BUSY signal.    

• Do you have mirror lock ON?  
• Do you have auto fucus enabled?

 

2017-08-22 15:08:49,762 [CameraTakePictureOnMessageRecieved] DEBUG - TAKE PICTURE ::: Shutter(MANUAL) Cable(CameraUSB) Av(2) Duration(1,0) Iso(1600) Quality(JPEG Fine) Mirror(0) SaveTo(PC)
2017-08-22 15:08:54,091 [CameraTakePictureOnMessageRecieved] ERROR - [kNkMAIDResult_DeviceBusy] (kNkMAIDCommand_CapSet, 33089, kNkMAIDDataType_Boolean, 0)
2017-08-22 15:08:54,091 [CameraTakePictureOnMessageRecieved] ERROR -    bij BinaryRivers.Camera.Nikon.Wrapper.NikonTaskQueue.Invoke(Delegate d, Object[] args)
   bij BinaryRivers.Camera.Nikon.Wrapper.NikonBase.Set(eNkMAIDCapability cap, Object value)
   bij BinaryRivers.Camera.Nikon.Wrapper.NikonDevice.StopBulbCapture()
   bij BinaryRivers.Camera.Nikon.CameraModel.<>c__DisplayClass26_0.<DoTakePictureBulb>b__0()
   bij BinaryRivers.Common.ProviderInterfaces.Camera.CameraControllerBase.DoWithCameraLocked(Action action)
   bij BinaryRivers.Camera.Nikon.CameraModel.DoTakePictureBulb(Boolean start, Single mirrorlockseconds)
   bij BinaryRivers.Common.Model.CameraModelBase.TakePictureBulb(Single durationseconds, Single mirrorlockseconds, String progresstext)
   bij BinaryRivers.Common.Model.CameraModelBase.<>c__DisplayClass77_0.<CameraTakePictureOnMessageRecieved>b__0(Object state)
2017-08-22 15:08:54,091 [CameraTakePictureOnMessageRecieved] INFO  - Timespan 4,641
2017-08-22 15:08:54,091 [CameraTakePictureOnMessageRecieved] INFO  - Imaging session cancelled
2017-08-22 15:08:54,106 [CameraTakePictureOnMessageRecieved] INFO  - [kNkMAIDResult_DeviceBusy] (kNkMAIDCommand_CapSet, 33089, kNkMAIDDataType_Boolean, 0)
2017-08-22 15:08:54,106 [CameraTakePictureOnMessageRecieved] ERROR - [kNkMAIDResult_DeviceBusy] (kNkMAIDCommand_CapSet, 33089, kNkMAIDDataType_Boolean, 0)
 

[wimbeerens]

I had auto focus off and on but the issue is still there.

Mirror lock OFF its the same issue.logfile-[20170822-19h58m22s296]-[11100]-2017-08-22.txt

When i put mirror lock on, the log says: Your camera requires a configured serial cable for BULB or Mirror Lock. i cant do a thing.

Here my new log file:

 

[wimbeerens]

Is there a way that Backyard Nikon works with Mirrorlock ON? With my camera?