1100D and iso problem?

[Krawler14]

So Im new to astrophotography, was told by numerous people to check out BYOS, so far I really enjoy this piece of software, your software is brilliant in both features and GUI.

 

I am having 1 issue however.. and im not sure if its a limitation of the trial, or my camera.  I recently used BYEOS to shoot Jupiter and M42.  during M42 I realized I couldn't change my ISO setting (in imaging mode, not planetary). it was locked on 1600 , or rather, this was the only option showing up in the drop down menu.  I hope that this isn't a limitation of my camera ( Rebel T3, 1100D) because on the camera itself (outside of EOS) I can change my ISO to several different settings.

 

any information on what im running into here would be much appreciated.

 

[admin]

completely different topic here, but didn't want to make another thread. does BYEOS automatically turn off canons noise reduction options or no I need to find these in the camera and turn them off manually?

 

It is up to you to set/unset this feature using the camera menu.

 

BYE will respect the setting.

[astroman133]

In previous posts, some people have reported that some dropdown lists are missing values that should be present.  Here is what fixed them:

 

Delete the cache folder in BackyardTEMP\cache and turn the camera on and make sure the camera is set to M on first start up after deleting the cache.

[admin]

Rick nailed it.

 

Let us know it it fixes your issue. 

 

Regards

[Krawler14]

thanks! this fixed my issue. when I first connected the camera I did not have it in Manual mode. so this makes sense!

[Krawler14]

completely different topic here, but didn't want to make another thread. does BYEOS automatically turn off canons noise reduction options or no I need to find these in the camera and turn them off manually?