eos r

[akihikoy@u01.itscom.net]

Hello,

I`m attepmting to use bye with a eos r, but I can`t open the bye,  although APT can be opened smoothly.

the log is as follows,

21:22:57  Licensed to yamada
21:22:57  Processor Affinity
21:23:13  Attempting to connect camera...
21:23:13  Canon drivers 'Canon\' initialized.
21:23:13  Camera Not Found!  Make sure it's connected to the PC and turned ON
21:23:37  Copy to clipboard

regards,

akihiko yamada

[akihikoy@u01.itscom.net]

Thank you.

I've successfully installed a pre-release version, and attempted many modes.

[admin]

Which version are you using, the full number?

You need to download the latest pre-release from the download section to use the EOS-R.

Regards,

[s3igell]

Before running BYE (BackyardEOS), you will need to load the Canon Drivers which came with the Camera on a CD.  These usually include loading the EOSUtility Program - which can also be used as a Quick Test to ensure that the Drivers loaded successfully. (Once done with EOSUtility, ensure that it's "Run in Background" Setting=OFF, then Exit the EOSUtility Program, then Reboot.)

Now, you should have everything that you need in order to Install and Run the Latest Pre-Release version of BYE.

[admin]

2 hours ago, akihikoy@u01.itscom.net said:

Thank you.

I've successfully installed a pre-release version, and attempted many modes.

Glad you got it to work

[mooneyeagle]

I just purchased BYE and a canon Ra. Connected camera to computer with hdmi mini cable and it won’t connect to BYE. Can you help. 

[s3igell]

3 minutes ago, mooneyeagle said:

I just purchased BYE and a canon Ra. Connected camera to computer with hdmi mini cable and it won’t connect to BYE. Can you help. 

Please start by following all of the instructions in the posts above - including making sure to use your USB Cable (HDMI is for Video Output ONLY).

[admin]

5 hours ago, mooneyeagle said:

I just purchased BYE and a canon Ra. Connected camera to computer with hdmi mini cable and it won’t connect to BYE. Can you help. 

The Ra is not the same as the R.

Please start a new thread and we'll go from there.  It's going to be easier to follow this way.

Regards,