BackyardNIKON 1.0.3 just released!

[admin]

I have just posted BackyardNIKON 1.0.3 in the download section.

 

The change log is on the actual file download page.

The difference between Classic and Premium edition is on the product page.

Regards,

[FWM891]

Couple of things then just for clarification:

 

If I go into Device Manager I can see two cameras as portable devices and double clicking on them gives me their connections: i.e. Port_#0001.Hub_#0005, which is a different configuration to the host location in the user manual?

 

To use two (or more) cameras I'm guessing that each should be connected to the PC in the same manner i.e. both through Shoestring DSUSB devices, USB or similar but not mixed?

 

Many thanks

[s3igell]

The DSUSB Settings (and any other Camera-specific Settings) for the 2nd (slave) Camera will be set in the 2nd Camera instance of BYN.

[admin]

Yes, both cameras connected to the PC.

 

The design is simple.  Both application instance should have a separate camera connected to it and must be operational on its own; if not is will not work.

 

The dual camera config will have 1 instance (the master instance) send the take picture command to the other instances (slave instances) as if you had press the "start capture" on these slave instances as well... but it is done automatically.

 

Hope this helps,

 

Regards.

[FWM891]

Just downloaded BYN 1.0.3 and see that there's now a dual camera button but I can find no documentation on how to set-up the second camera...

[admin]

It's in the user guide!  Click ? icon in the application.

 

Regards,