Be as specific as possible when reporting issues and *ALWAYS* include the full version number of the application you are using and your exact *CAMERA MODEL*
NEVER POST YOUR KEY IN ANY PUBLIC FORUM, INCLUDING THE O'TELESCOPE SUPPORT FORUM ::: IF YOU DO YOUR KEY WILL BE DEACTIVATED WITHOUT NOTICE!
- 0
Question
jpallison
I have a Nikon D300 which needs requires a serial cable connection to use the BULB feature in BYN.
I bought a cable from Shoestring Astronomy that connects from the D300's 10 pin remote terminal via a DSUSB box to my computer's USB port. First off does that sound like I hooked it up right?
When I try taking a BULB picture I get an error that says "Your camera requires a configured serial cable for BULB or Mirror Lock.
I tried it WITHOUT a second cable connecting the usb on my camera connected to another USB port and I could not connect the D300 to BYN. (it normally does fine connecting to byn)
Do I use two cables to use the BULB function? Am I hooking it up correctly? Any insight would be greatly appreciated.
Thank you
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.