Support for EOS 750D / Rebel T6i

[xTACKSx]

Hi,

 

I have just purchased a  EOS 750D (T6i) and getting the errors connecting as well.

 

Any Ideas?

 

Here is the log:

15:21:35  Licensed to xTACKSx

15:21:47  Attempting to connect camera...

15:21:47  Canon drivers 'Canon\' initialized.

15:21:47  DEVICEINFO DESCRIPTION IS Canon EOS 750D

15:21:47  DEVICEINFO NUMBER IS 3470492101.

15:21:47  YOUR *REAL* MODEL NUMBER IS 4294967294(FFFFFFFE)

15:21:47  Generic model 153 assumed!

 

 

Thanks.

[admin]

I should be releasing 3.1.4 towards the end of July with with T6i support.

 

In the meantime if you want to download link with the T6i drivers send me an email to support@otelescope.com and I'll send you a link.

 

Regards,

[B1900Mech]

Hi from Jim, I will be getting the Canon T6s,any news on that model? Thanks.

[admin]

The SDK is not out.  Ping me when you get the camera and I may be able to support it with a little bit of your help.

 

Regards,

[B1900Mech]

Will do Guylain,Thanks !

[B1900Mech]

I have the T6s .

[admin]

I have the T6s .

 

The SDK is not out yet for this model

 

Regards,

[astroman133]

I am assuming that since the T6i is not listed as a supported model (see the Camera Support Grid at the bottom of this page) that the Canon SDK that is distributed with BYE does not recognize that model.  It usually takes Canon some time, perhaps several months, to release a new version of an SDK with support for new camera models. Then, Guylain has to apply to Canon to get the SDK and finally to test BYE against the new SDK and camera.  All this takes time, so you need to be patient.

[xTACKSx]

I should be releasing 3.1.4 towards the end of July with with T6i support.

 

In the meantime if you want to download link with the T6i drivers send me an email to support@otelescope.com and I'll send you a link.

 

Regards,

OK - thanks - Email sent.

[airwolf59]

I bought BYE after it was supporting the EOS 760D. BYE is connecting, but controlling the camera is not working.

 

The log is here:

 

 

12:00:25  Attempting to connect camera...

12:00:25  Canon drivers 'Canon\' initialized.

12:00:25  DEVICEINFO DESCRIPTION IS Canon EOS 760D

12:00:25  DEVICEINFO NUMBER IS xxxxxxxxx

12:00:25  YOUR *REAL* MODEL NUMBER IS xxxxxxxxxxxx

12:00:25  Generic model 153 assumed!

12:00:27  Canon EOS 760D CONNECTED!

12:00:35  Imaging session started.

12:00:37  Imaging session cancelled

12:00:37  Your camera requires a configured serial cable for BULB or Mirror Lock.

12:00:38  Imaging session cancelled

 

 

Regards

[admin]

You have the 760D, not the 750D. Right? The 760d is not supported yet, still waiting for the SDK.

[airwolf59]

Yep, its the 760D. Didn't noticed thats a difference between 750 and 760.

 

Thanks and regards

[admin]

as soon as I can get it I'll add it.