Be as specific as possible when reporting issues and *ALWAYS* include the full version number of the application you are using and your exact *CAMERA MODEL*
NEVER POST YOUR KEY IN ANY PUBLIC FORUM, INCLUDING THE O'TELESCOPE SUPPORT FORUM ::: IF YOU DO YOUR KEY WILL BE DEACTIVATED WITHOUT NOTICE!
- 0
Question
Pintec
Having problem with slewing iEQ45 pro mount with the ASCOM controls in BYEOS.
The mount is selected in drop down, but it will only move the mount in sidereal 1x speed
When a different speed in iOptron Commander app is used to slew scope, it works fine.
When you try again in BYEOS is changes it back to 1x no mater what % speed level is selected.
(also changes iOptron Commander speed back to 1x)
Any ideas? Rob
FYI all iEQ45 firmware is up to date.
Link to comment
Share on other sites
Top Posters For This Question
1
1
Popular Days
Nov 1
2
Top Posters For This Question
admin 1 post
Pintec 1 post
Popular Days
Nov 1 2020
2 posts
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.