Eagle

47 products

1. 

   EAGLE5 PRO computer for telescopes and astrophotography [PRI-EAGLE5-PRO]

   $2,018.90 USD $2,238.90 USD

   specialorder On sale

   Scheduled Delivery

   PrimaluceLab: 

   EAGLE5 PRO computer for telescopes and astrophotography
   EAGLE5 PRO is the computer for telescopes and astrophotography that provides desktop class performance thanks to fast i5 processor, Industrial Grade 16 GB fast DDR4 memory, large and quick 500 GB SSD drive Industrial Grade (NVMe), added connectivity - now with 10 USB ports (1 x Thunderbolt 3 with USB-C type connector, 1 x Thunderbolt 4 with USB-C type connector), new Inclinometer and Motion Detector sensors, and more powerful WiFi 6 wireless networking.

   All in a lightweight, compact all-in-one design with PLUS aluminum housing to be installed on your telescope and that comes with all of the advanced features of the previous EAGLE like GPS sensor with high gain antenna to automatically detect your position and time, EYE sensor to monitor sky quality in the area your telescope is pointed, DARK mode to disable all of the LEDs on the EAGLE and much more!
   EAGLE5 PRO computer for telescopes and astrophotography - main features:
   Windows 11 Enterprise computer lets you install your preferred Windows software and use the devices you want
   Intel’s 11th generation i5 processor with 16GB RAM DDR4 3200 MHz and 5000GB SSD NVMe disk 
   Industrial grade SSD disk and RAM module to provide the best reliability also in very low temperatures
   10 port USB hub with 3x high speed USB 3.2, 2x USB 4 type-C ports (1x Thunderbolt 3 and 1x Thunderbolt 3) plus 5x USB 2.0 ports (4 of them with remote on/off capability)
   4 x 12V power out ports with remote ON/OFF control to power your mount, camera and other 12V accessories
   3x variable 3-12V power out ports for dew heaters
   GPS sensor with high gain antenna to detect elevation, latitude, longitude, date and time
   EYE sensor to monitor sky quality in a 5° field of view where the telescope is pointed
   Inclinometer to measure elevation of your telescope
   Motion Detector to detect unexpected or unwanted motions of your telescope caused by high winds, sudden flexures or cable snags.
   DARK mode to turn off all the LED lights
   Powerful and fast WiFi 6 (802.11ax) with dual band (2.4 and 5 GHz) connection
   Power consumption of every device powered through the 12v power OUT ports of the EAGLE
   Power level monitoring provided to 12V power IN port of the EAGLE
   EAGLE Manager X interface to easily control all the EAGLE’s features
   PLUS aluminum case, allowing you to easily attach the EAGLE to any telescope by adding rings, bars or clamps
   Weight: 1.25 kg (2.75 lb)
   EAGLE5 PRO provides desktop class performance with lower power consumption.
   EAGLE5 PRO brings the power of a desktop class computer in the compact form factor of the EAGLE. This means your EAGLE5 PRO will not only have enough space to save all your software and data, but it is also powerful and responsive enough to run the most demanding astrophotography applications. The EAGLE5 PRO is also a great computer for planetary imaging, with the latest generation USB 3.0 cameras that require higher levels of processing power, in order to save high resolution videos at high frame rates, and the storage space required.

   Intel’s 11th generation i5 quad core processor with 8MB of cache provides desktop class performance with lower power consumption than standard computers. EAGLE5 PRO offers three USB 3.2 type A ports, two USB 4 (with type-C connector, one is Thunderbolt 4 and one is Thunderbolt 3) ports with data transfer rates up to 40 Gbps, as well as five USB 2.0 ports, two HDMI 2.0b ports, a 2.5 Gigabit ethernet port and WiFi 6 802.11ax connectivity.EAGLE5 PRO with Thunderbolt ports and USB-C connectors: high speed connectivity.
   EAGLE5 PRO also adds incredibly fast and powerful Thunderbolt 4 and 3 ports with USB-C type connectors allowing connections up to 40 Gbps with more connectivity options. Compared to a standard USB port, USB-C/Thunderbolt adds many additional features:
   
- Speed: while USB 3.0 is up to 5 Gbps, the Thunderbolt 3/4 port offers connectivity speeds up to 40 Gbps
   
- Power: the Thunderbolt 4 port is capable of providing up to 100 W, Thunderbolt 3 up to 15W
   
- Connectivity: you can connect many devices like external drives, displays, multi port docking stations, audio devices, etc. It allows you to connect as many as 6 devices, daisy chained, through a single compact port. Since it has a USB-C type connector, the cable is reversible so there is no wrong way to connect it. If you have a standard USB-C device, you can connect it to the Thunderbolt port (in this case the maximum speed will be 10 Gbps). 

   EAGLE5 PRO comes with Inclinometer to measure inclination of your telescope.
   The Inclinometer sensor built into the EAGLE5 PRO measures the elevation of your telescope with respect to the horizon level, with a resolution of 0.1 degrees (and a measured average error lower than 1 degree). Inclination data is shown in real time in the EAGLE Manager X interface and, since the EAGLE is designed to be installed in parallel to your telescope (elevation is correctly displayed also if the EAGLE is in inverted position, with the power out ports pointing the sky), you can also remotely check if your telescope is pointed at the correct elevation, if your equatorial mount elevation setting is correctly set based on your Latitude, or if your Alt-Az mount home position is correctly set in elevation.
   EAGLE5 PRO comes with Motion Detector to detect unexpected or unwanted motions of your telescope.
   When recording a sequence, you may have one of your pictures blurred while the others are sharp: many external factors like wind gusts or cable snags may impact your telescope correct tracking during an acquisition. The Motion Detector shows in the EAGLE Manager X the unwanted motions without without confusing them with mount tracking or goto movements. This way PLAY (or third party software that support Motion Detector) can automatically repeat the last acquisition if EAGLE detects an unexpected motion.
   EAGLE Manager X interface to easily control all the EAGLE’s features.
   EAGLE5 PRO comes with special "EAGLE Manager X" software that starts automatically at Windows startup and provides an easy and intuitive interface, allowing you to:

   Enable/Disable every 12V power out port: this way you can keep all your devices connected (for example, mount, camera, filter wheel, etc.) and activate them remotely when you turn on the entire system. 
   Check power consumption: it allows you to check how much power every 12V device powered through the EAGLE requires and it shows the total power consumption of your telescope this way providing you the best way to monitor your system power.
   Name power and USB ports: you can rename every port with the name of the connected device, in order to easily control them or to save COM port number associated to a specific device.
   Check for GPS data: elevation, latitude, longitude, date, time and number of connected satellites
   Check for EYE sky quality: select the sensor facing toward the sky and check for sky quality value
   Set the power out voltage of the 3 x 0-12V power out ports: increase or decrease the power to dew heaters connected to EAGLE. Each port shows the current consumption that can also be monitored over time.
   Check for Inclinometer to verify elevation of your telescope in respite to the horizon level.
   Show Motion Detector data and visualize if unwanted motions are recorded.
   Activate DARK mode: this turns off all the LED lights.
   Connect or disconnect devices connected to the A-B-C-D USB 2.0 ports: this feature is convenient in case of temporary crash of an auto-guider or planetary camera, which can then be reset without the need to go to the telescope and disconnect/reconnect a cable.
   Set wireless or wired connectivity: it shows the IP addresses you can use with remote desktop to access your EAGLE in AP mode (use your smartphone, tablet or external computer by connecting directly to EAGLE without the need of a WiFi router) or HOST mode for connecting to your existing network such as your home WiFi, also with a wired connection.
   Set your automatic power routines: you can define port status “After power on” and “Before shut down” for the devices connected to the EAGLE. This way, for example, you can automatically turn on all your devices after you start the EAGLE and turn them all off when you shut down the EAGLE.
   Automatically connect to the optional ECCO controller: if you have the environmental controller, EAGLE Manager X is able to automatically connect at startup and take control of dew heater power based on calculated dew-point.
   Save EAGLE sensors data in log files for later processing: data from various sensors are saved in log files directly on your EAGLE this way you can later download them. 

   EAGLE comes with Windows so you can use the software and devices you like.
   In the modern world there are many operative systems that do a great job. But, when it comes to astronomy software and drivers, most of it works on Windows. That's why the EAGLE runs Windows, so you can connect to the EAGLE the devices you like (since manufacturers provide official drivers for Windows 10/11) and install the Windows software you prefer (it has just to be compatible with Windows 10/11): anything you can load on your standard Windows 10/11 computer at home, you can load on the EAGLE. This way you're not just locked in to one particular company in their hardware and you can easily customize the EAGLE in the way you like. EAGLE5 uses Windows 11 IoT Enterprise licence that is lighter-weight and more stable than traditional PCs with Windows 11 Home or other OEM versions that come preinstalled with useless bloatware.
   Performance comparison with a miniPC.
   EAGLE not only offers exclusive features for advanced astrophotography, but also all the power of a real computer (superior to a Mini PC) to allow you to use any astrophotography software. In order to test its performance, we used the PCMark benchmark and compared EAGLE LE, EAGLE4, EAGLE5 S, EAGLE5 PRO and EAGLE5 XTM with one of the many Mini PCs on the market (where we installed the same EAGLE operating system for a precise results comparison). As you can see in the picture below, EAGLE4/LE offer 32% more performance than a common Mini PC with Intel Celeron N3160 processor, 4GB of RAM and SSD disk; EAGLE5 S still raises the gap by bringing this difference to 183%; EAGLE5 PRO increases even more to +231% and the faster EAGLE5 XTM boosts everything to an incredible +316%!
   EAGLE: a complete family of computers for telescopes.
   All of the EAGLE computers run Windows so you can install your preferred Windows software and use the devices you want, but in order to better suit everyone’s needs, we developed a complete line of EAGLE computers providing different computing power, memory capacity, disk space, advanced features and integrated sensors. This allows you to choose the EAGLE that best fits your application, power requirements and budget. In the table below you will find the specifications of all the EAGLE models with different processors, RAM memories, SSD disks, USB ports, HDMI ports, wireless and wired connectivity, integrated sensors and operative systems.

   EAGLE5 PRO: dimensions and weight
   EAGLE5 PRO includes all these advanced features in an aluminum, lightweight, compact all-in-one chassis designed to be installed on your telescope in the way you prefer. This way you can connect all the USB and 12V power cables from your devices to the EAGLE greatly improving your cable management. The EAGLE5 PRO weights just 1.25 kg (2.75 lbs). In the picture you can see all the dimensions with positions of M6 and M5 threaded holes to connect rings, bars and clamps.
   EAGLE5 PRO computer for telescopes and astrophotography: scope of delivery.
   EAGLE5 PRO computer
   2 WiFi antennas
   1x GPS antenna
   12V power cable with cigarette plug for EAGLE - 250cm
   n.4 M6x8 screws + n.4 M6x10 screws + n.4 M6x12 screws + n.4 n.4 M6x18 screws + n.4 M6x25 screws + n.4 M6x35 screws
   Quick guide

     Add to cart
2. 

   EAGLE5 XTM computer for telescopes and astrophotography [PRI-EAGLE5-XTM]

   $2,754.90 USD $3,054.90 USD

   specialorder On sale

   Scheduled Delivery

   PrimaluceLab: EAGLE5 XTM computer for telescopes and astrophotography
   EAGLE5 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast AMD Ryzen 3 5400U processor, Industrial Grade 32 GB fast DDR4 memory, and huge Industrial Grade 2TB SSD drive (NVMe). Thanks to dual LAN port, 10 USB ports (4x high speed USB 3.2 ports plus 6x USB 2.0 ports), new Inclinometer and Motion Detector sensors, and more powerful WiFi 6 wireless networking, it's the perfect solution even for the most demanding application like remote astronomical observatory control.

   All in a lightweight, compact all-in-one design with PLUS aluminum housing to be installed on your telescope and that comes with all of the advanced features of the previous EAGLE like GPS sensor with high gain antenna to automatically detect your position and time, EYE sensor to monitor sky quality in the area your telescope is pointed, DARK mode to disable all of the LEDs on the EAGLE and much more!

   EAGLE5 XTM computer for telescopes and astrophotography - main features:
   Windows 11 Enterprise computer lets you install your preferred Windows software and use the devices you want
   AMD’s Ryzen 3 5400U processor with 32GB RAM DDR4 3200 MHz and 2TB SSD NVMe disk 
   Industrial grade SSD disk and RAM module to provide the best reliability also in very low temperatures
   10 port USB hub with 2x high speed USB 3.2 ports, 2x high speed USB 3.2 type-C ports plus 6x USB 2.0 ports (4 of them with remote on/off capability)
   4 x 12V power out ports with remote ON/OFF control to power your mount, camera and other 12V accessories
   3x variable 3-12V power out ports for dew heaters
   GPS sensor with high gain antenna to detect elevation, latitude, longitude, date and time
   EYE sensor to monitor sky quality in a 5° field of view where the telescope is pointed
   Inclinometer to measure elevation of your telescope
   Motion Detector to detect unexpected or unwanted motions of your telescope caused by high winds, sudden flexures or cable snags.
   DARK mode to turn off all the LED lights
   Powerful and fast WiFi 6 (802.11ax) with dual band (2.4 and 5 GHz) connection
   Power consumption of every device powered through the 12v power OUT ports of the EAGLE
   Power level monitoring provided to 12V power IN port of the EAGLE
   EAGLE Manager X interface to easily control all the EAGLE’s features
   PLUS aluminum case, allowing you to easily attach the EAGLE to any telescope by adding rings, bars or clamps
   Weight: 1.38 kg (3 lb)
   EAGLE5 XTM is the most powerful ever,  with the largest storage space. 
   AMD’s Ryzen 3 5400U processor together with 32GB RAM DDR4 3200 MHz RAM memory make the EAGLE5 XTM the most powerful ever EAGLE, providing you great performances with any Windows software you want to install. This is great also if you want to use complex softwares that require a lot of computing power and/or you want to use many softwares at the same time. EAGLE5 XTM provides a the best storage space among the EAGLE line thanks to the huge 2TB SSD NVMe disk that is also very fast this way providing the best performances also when saving or accessing to large files.

   EAGLE5 XTM offers two USB 3.2 type-A ports, two USB 3.2 type-C ports, as well as six USB 2.0 ports, one HDMI 2.0b port, dual LAN port (one Gigabit ethernet and one 2.5 Gigabit ethernet) and WiFi 6 802.11ax connectivity.

   EAGLE5 XTM with Dual LAN port and 10 USB ports.
   EAGLE5 XTM offers dual LAN port that is very useful when you want to control a remote telescope, also in an astronomical observatory. For example you can connect the EAGLE to a router to provide Internet access (this can be done also by using the EAGLE's WiFi 6 connection) and you can connect to the second LAN port an IP camera you can use to remotely see your telescope.

   Thanks to 10 USB ports (2x high speed USB 3.2 type-A ports, 2x high speed USB 3.2 type-C ports plus 6x USB 2.0 ports) you can connect to the EAGLE5 XTM up to 10 USB devices, this is great also if you want to remotely control a dual telescope setup!
   EAGLE5 XTM comes with Inclinometer to measure inclination of your telescope.
   The Inclinometer sensor built into the EAGLE5 XTM measures the elevation of your telescope with respect to the horizon level, with a resolution of 0.1 degrees (and a measured average error lower than 1 degree). Inclination data is shown in real time in the EAGLE Manager X interface and, since the EAGLE is designed to be installed in parallel to your telescope (elevation is correctly displayed also if the EAGLE is in inverted position, with the power out ports pointing the sky), you can also remotely check if your telescope is pointed at the correct elevation, if your equatorial mount elevation setting is correctly set based on your Latitude, or if your Alt-Az mount home position is correctly set in elevation.
   EAGLE5 XTM comes with Motion Detector to detect unexpected or unwanted motions of your telescope.
   When recording a sequence, you may have one of your pictures blurred while the others are sharp: many external factors like wind gusts or cable snags may impact your telescope correct tracking during an acquisition. The Motion Detector shows in the EAGLE Manager X the unwanted motions without without confusing them with mount tracking or goto movements. This way PLAY (or third party software that support Motion Detector) can automatically repeat the last acquisition if EAGLE detects an unexpected motion. 

   EAGLE Manager X interface to easily control all the EAGLE’s features.
   EAGLE5 XTM comes with special "EAGLE Manager X" software that starts automatically at Windows startup and provides an easy and intuitive interface, allowing you to:

   Enable/Disable every 12V power out port: this way you can keep all your devices connected (for example, mount, camera, filter wheel, etc.) and activate them remotely when you turn on the entire system. 
   Check power consumption: it allows you to check how much power every 12V device powered through the EAGLE requires and it shows the total power consumption of your telescope this way providing you the best way to monitor your system power.
   Name power and USB ports: you can rename every port with the name of the connected device, in order to easily control them or to save COM port number associated to a specific device.
   Check for GPS data: elevation, latitude, longitude, date, time and number of connected satellites
   Check for EYE sky quality: select the sensor facing toward the sky and check for sky quality value
   Set the power out voltage of the 3 x 0-12V power out ports: increase or decrease the power to dew heaters connected to EAGLE. Each port shows the current consumption that can also be monitored over time.
   Check for Inclinometer to verify elevation of your telescope in respite to the horizon level.
   Show Motion Detector data and visualize if unwanted motions are recorded.
   Activate DARK mode: this turns off all the LED lights.
   Connect or disconnect devices connected to the A-B-C-D USB 2.0 ports: this feature is convenient in case of temporary crash of an auto-guider or planetary camera, which can then be reset without the need to go to the telescope and disconnect/reconnect a cable.
   Set wireless or wired connectivity: it shows the IP addresses you can use with remote desktop to access your EAGLE in AP mode (use your smartphone, tablet or external computer by connecting directly to EAGLE without the need of a WiFi router) or HOST mode for connecting to your existing network such as your home WiFi, also with a wired connection.
   Set your automatic power routines: you can define port status “After power on” and “Before shut down” for the devices connected to the EAGLE. This way, for example, you can automatically turn on all your devices after you start the EAGLE and turn them all off when you shut down the EAGLE.
   Automatically connect to the optional ECCO controller: if you have the environmental controller, EAGLE Manager X is able to automatically connect at startup and take control of dew heater power based on calculated dew-point.
   Save EAGLE sensors data in log files for later processing: data from various sensors are saved in log files directly on your EAGLE this way you can later download them.EAGLE comes with Windows so you can use the software and devices you like.
   In the modern world there are many operative systems that do a great job. But, when it comes to astronomy software and drivers, most of it works on Windows. That's why the EAGLE runs Windows, so you can connect to the EAGLE the devices you like (since manufacturers provide official drivers for Windows 10/11) and install the Windows software you prefer (it has just to be compatible with Windows 10/11): anything you can load on your standard Windows 10/11 computer at home, you can load on the EAGLE. This way you're not just locked in to one particular company in their hardware and you can easily customize the EAGLE in the way you like. EAGLE5 uses Windows 11 IoT Enterprise licence that is lighter-weight and more stable than traditional PCs with Windows 11 Home or other OEM versions that come preinstalled with useless bloatware.
   Performance comparison with a miniPC.
   EAGLE not only offers exclusive features for advanced astrophotography, but also all the power of a real computer (superior to a Mini PC) to allow you to use any astrophotography software. In order to test its performance, we used the PCMark benchmark and compared EAGLE LE, EAGLE4, EAGLE5 S, EAGLE5 PRO and EAGLE5 XTM with one of the many Mini PCs on the market (where we installed the same EAGLE operating system for a precise results comparison). As you can see in the picture below, EAGLE4/LE offer 32% more performance than a common Mini PC with Intel Celeron N3160 processor, 4GB of RAM and SSD disk; EAGLE5 S still raises the gap by bringing this difference to 183%; EAGLE5 PRO increases even more to +231% and the faster EAGLE5 XTM boosts everything to an incredible +316%! EAGLE: a complete family of computers for telescopes.
   All of the EAGLE computers run Windows so you can install your preferred Windows software and use the devices you want, but in order to better suit everyone’s needs, we developed a complete line of EAGLE computers providing different computing power, memory capacity, disk space, advanced features and integrated sensors. This allows you to choose the EAGLE that best fits your application, power requirements and budget. In the table below you will find the specifications of all the EAGLE models with different processors, RAM memories, SSD disks, USB ports, HDMI ports, wireless and wired connectivity, integrated sensors and operative systems.
   EAGLE5 XTM: dimensions and weight
   EAGLE5 XTM includes all these advanced features in an aluminum, lightweight, compact all-in-one chassis designed to be installed on your telescope in the way you prefer. This way you can connect all the USB and 12V power cables from your devices to the EAGLE greatly improving your cable management. The EAGLE5 XTM weights just 1.38 kg (3 lbs). In the picture you can see all the dimensions with positions of M6 and M5 threaded holes to connect rings, bars and clamps.
   EAGLE5 XTM computer for telescopes and astrophotography: scope of delivery.
   EAGLE5 XTM computer
   2 WiFi antennas
   1x GPS antenna
   12V power cable with cigarette plug for EAGLE - 250cm
   n.4 M6x8 screws + n.4 M6x10 screws + n.4 M6x12 screws + n.4 n.4 M6x18 screws + n.4 M6x25 screws + n.4 M6x35 screws
   Quick guide
    

     Add to cart
3. 

   EAGLE5 S computer for telescopes and astrophotography [PRI-EAGLE5S]

   $1,558.90 USD $1,728.90 USD

   specialorder On sale

   Scheduled Delivery

   PrimaluceLab: 

   EAGLE5 S computer for telescopes and astrophotography

   EAGLE5 S is the advanced computer for telescopes and astrophotography with its fast i3 processor, Industrial Grade 8 GB fast DDR4 memory, large and quick 250 GB SSD drive Industrial Grade (NVMe), added connectivity - now with 10 USB ports (1 x Thunderbolt 3 with USB-C type connector, 1 x Thunderbolt 4 with USB-C type connector), new Inclinometer and Motion Detector sensors, and more powerful WiFi 6 wireless networking. 

   All in a lightweight, compact all-in-one design with PLUS aluminum housing to be installed on your telescope and that comes with all of the advanced features of the previous EAGLE like GPS sensor with high gain antenna to automatically detect your position and time, EYE sensor to monitor sky quality in the area your telescope is pointed, DARK mode to disable all of the LEDs on the EAGLE and much more!
   EAGLE5 S computer for telescopes and astrophotography - main features:
   Windows 11 Enterprise computer lets you install your preferred Windows software and use the devices you want
   Intel’s 11th generation i3 processor with 8GB RAM DDR4 3200 MHz and 250GB SSD NVMe disk 
   Industrial grade SSD disk and RAM module to provide the best reliability also in very low temperatures
   10 port USB hub with 3x high speed USB 3.2, 2x USB 4 type-C ports (1x Thunderbolt 3 and 1x Thunderbolt 3) plus 5x USB 2.0 ports (4 of them with remote on/off capability)
   4 x 12V power out ports with remote ON/OFF control to power your mount, camera and other 12V accessories
   3x variable 3-12V power out ports for dew heaters
   GPS sensor with high gain antenna to detect elevation, latitude, longitude, date and time
   EYE sensor to monitor sky quality in a 5° field of view where the telescope is pointed
   Inclinometer to measure elevation of your telescope
   Motion Detector to detect unexpected or unwanted motions of your telescope caused by high winds, sudden flexures or cable snags.
   DARK mode to turn off all the LED lights
   Powerful and fast WiFi 6 (802.11ax) with dual band (2.4 and 5 GHz) connection
   Power consumption of every device powered through the 12v power OUT ports of the EAGLE
   Power level monitoring provided to 12V power IN port of the EAGLE
   EAGLE Manager X interface to easily control all the EAGLE’s features
   PLUS aluminum case, allowing you to easily attach the EAGLE to any telescope by adding rings, bars or clamps
   Weight: 1.25 kg (2.75 lb)
   EAGLE5 S provides more processing power and space with low power consumption.
   EAGLE5 S is perfect if you want more power and storage space in your EAGLE but you still want a compact system with low power consumption. The EAGLE5 S can still deliver desktop class performance, with an average power consumption of only 1A, so it can still be powered with a compact field battery - but it delivers more than 2x the performance of the standard EAGLE4 making the EAGLE5 S the model with the best price/performances ratio among the EAGLE line.

   Intel’s 11th generation i3 processor with only 15W of TDP and 6MB of cache provides desktop class performance with low power consumption. EAGLE5 S offers three USB 3.2 type A ports, two USB 4 (with type-C connector, one is Thunderbolt 4 and one is Thunderbolt 3) ports with data transfer rates up to 40 Gbps, as well as five USB 2.0 ports, two HDMI 2.0b ports, a 2.5 Gigabit ethernet port and WiFi 6 802.11ax connectivity.
   EAGLE5 S with Thunderbolt ports and USB-C connectors: high speed connectivity.
   EAGLE5 S also adds incredibly fast and powerful Thunderbolt 4 and 3 ports with USB-C type connectors allowing connections up to 40 Gbps with more connectivity options. Compared to a standard USB port, USB-C/Thunderbolt adds many additional features:
   
- Speed: while USB 3.0 is up to 5 Gbps, the Thunderbolt 3/4 port offers connectivity speeds up to 40 Gbps
   
- Power: the Thunderbolt 4 port is capable of providing up to 100 W, Thunderbolt 3 up to 15W
   
- Connectivity: you can connect many devices like external drives, displays, multi port docking stations, audio devices, etc. It allows you to connect as many as 6 devices, daisy chained, through a single compact port. Since it has a USB-C type connector, the cable is reversible so there is no wrong way to connect it. If you have a standard USB-C device, you can connect it to the Thunderbolt port (in this case the maximum speed will be 10 Gbps).

   EAGLE5 S comes with Inclinometer to measure inclination of your telescope.
   The Inclinometer sensor built into the EAGLE5 S measures the elevation of your telescope with respect to the horizon level, with a resolution of 0.1 degrees (and a measured average error lower than 1 degree). Inclination data is shown in real time in the EAGLE Manager X interface and, since the EAGLE is designed to be installed in parallel to your telescope (elevation is correctly displayed also if the EAGLE is in inverted position, with the power out ports pointing the sky), you can also remotely check if your telescope is pointed at the correct elevation, if your equatorial mount elevation setting is correctly set based on your Latitude, or if your Alt-Az mount home position is correctly set in elevation.
   EAGLE5 S comes with Motion Detector to detect unexpected or unwanted motions of your telescope.
   When recording a sequence, you may have one of your pictures blurred while the others are sharp: many external factors like wind gusts or cable snags may impact your telescope correct tracking during an acquisition. The Motion Detector shows in the EAGLE Manager X the unwanted motions without without confusing them with mount tracking or goto movements. This way PLAY (or third party software that support Motion Detector) can automatically repeat the last acquisition if EAGLE detects an unexpected motion.
   EAGLE Manager X interface to easily control all the EAGLE’s features.
   EAGLE5 S comes with special "EAGLE Manager X" software that starts automatically at Windows startup and provides an easy and intuitive interface, allowing you to:

   Enable/Disable every 12V power out port: this way you can keep all your devices connected (for example, mount, camera, filter wheel, etc.) and activate them remotely when you turn on the entire system. 
   Check power consumption: it allows you to check how much power every 12V device powered through the EAGLE requires and it shows the total power consumption of your telescope this way providing you the best way to monitor your system power.
   Name power and USB ports: you can rename every port with the name of the connected device, in order to easily control them or to save COM port number associated to a specific device.
   Check for GPS data: elevation, latitude, longitude, date, time and number of connected satellites
   Check for EYE sky quality: select the sensor facing toward the sky and check for sky quality value
   Set the power out voltage of the 3 x 0-12V power out ports: increase or decrease the power to dew heaters connected to EAGLE. Each port shows the current consumption that can also be monitored over time.
   Check for Inclinometer to verify elevation of your telescope in respite to the horizon level.
   Show Motion Detector data and visualize if unwanted motions are recorded.
   Activate DARK mode: this turns off all the LED lights.
   Connect or disconnect devices connected to the A-B-C-D USB 2.0 ports: this feature is convenient in case of temporary crash of an auto-guider or planetary camera, which can then be reset without the need to go to the telescope and disconnect/reconnect a cable.
   Set wireless or wired connectivity: it shows the IP addresses you can use with remote desktop to access your EAGLE in AP mode (use your smartphone, tablet or external computer by connecting directly to EAGLE without the need of a WiFi router) or HOST mode for connecting to your existing network such as your home WiFi, also with a wired connection.
   Set your automatic power routines: you can define port status “After power on” and “Before shut down” for the devices connected to the EAGLE. This way, for example, you can automatically turn on all your devices after you start the EAGLE and turn them all off when you shut down the EAGLE.
   Automatically connect to the optional ECCO controller: if you have the environmental controller, EAGLE Manager X is able to automatically connect at startup and take control of dew heater power based on calculated dew-point.
   Save EAGLE sensors data in log files for later processing: data from various sensors are saved in log files directly on your EAGLE this way you can later download them.

    EAGLE comes with Windows so you can use the software and devices you like.
   In the modern world there are many operative systems that do a great job. But, when it comes to astronomy software and drivers, most of it works on Windows. That's why the EAGLE runs Windows, so you can connect to the EAGLE the devices you like (since manufacturers provide official drivers for Windows 10/11) and install the Windows software you prefer (it has just to be compatible with Windows 10/11): anything you can load on your standard Windows 10/11 computer at home, you can load on the EAGLE. This way you're not just locked in to one particular company in their hardware and you can easily customize the EAGLE in the way you like. EAGLE5 uses Windows 11 IoT Enterprise licence that is lighter-weight and more stable than traditional PC with Windows 11 Home or other OEM versions that come preinstalled with useless bloatware.
   Performance comparison with a miniPC.
   EAGLE not only offers exclusive features for advanced astrophotography, but also all the power of a real computer (superior to a Mini PC) to allow you to use any astrophotography software. In order to test its performance, we used the PCMark benchmark and compared EAGLE LE, EAGLE4, EAGLE5 S, EAGLE5 PRO and EAGLE5 XTM with one of the many Mini PCs on the market (where we installed the same EAGLE operating system for a precise results comparison). As you can see in the picture below, EAGLE4/LE offer 32% more performance than a common Mini PC with Intel Celeron N3160 processor, 4GB of RAM and SSD disk; EAGLE5 S still raises the gap by bringing this difference to 183%; EAGLE5 PRO increases even more to +231% and the faster EAGLE5 XTM boosts everything to an incredible +316%!
   EAGLE: a complete family of computers for telescopes.
   All of the EAGLE computers run Windows so you can install your preferred Windows software and use the devices you want, but in order to better suit everyone’s needs, we developed a complete line of EAGLE computers providing different computing power, memory capacity, disk space, advanced features and integrated sensors. This allows you to choose the EAGLE that best fits your application, power requirements and budget. In the table below you will find the specifications of all the EAGLE models with different processors, RAM memories, SSD disks, USB ports, HDMI ports, wireless and wired connectivity, integrated sensors and operative systems.
   EAGLE5 S: dimensions and weight
   EAGLE5 S includes all these advanced features in an aluminum, lightweight, compact all-in-one chassis designed to be installed on your telescope in the way you prefer. This way you can connect all the USB and 12V power cables from your devices to the EAGLE greatly improving your cable management. The EAGLE5 S weights just 1.25 kg (2.75 lbs). In the picture you can see all the dimensions with positions of M6 and M5 threaded holes to connect rings, bars and clamps.
   EAGLE5 S computer for telescopes and astrophotography: scope of delivery.
   EAGLE5 S computer
   2 WiFi antennas
   1x GPS antenna
   12V power cable with cigarette plug for EAGLE - 250cm
   n.4 M6x8 screws + n.4 M6x10 screws + n.4 M6x12 screws + n.4 n.4 M6x18 screws + n.4 M6x25 screws + n.4 M6x35 screws
   Quick guide

     Add to cart
4. 

   PLUS raisers for EAGLE CORE [PRI-EAGLECORE-DI]

   $25.50 USD

   specialorder

   Scheduled Delivery

   PrimaluceLab: PLUS raisers for EAGLE CORE allow you to install, on the side of its body, the 80mm PLUS guide rings without them to touch the EAGLE CORE body. This way you can install the guide scope on the side and fix the DSLR camera with its photo lens on top. This is the way to use your DSLR camera to record long exposure astrophotography of deep-sky objects with autoguide and without a telescope!

   
   In order to use EAGLE CORE together with a telephoto lens (and guide scope in parallel) you have to add "140mm PLUS dovetail bar" to be connected under EAGLE CORE body, in order to install everything on the equatorial mount. In the upper part the Eagle Core has a 1 1/4" photo thread to connect a photo ball head and then the camera. If you have an heavy photo lens (for example with focal length higher than 200mm) you can add the "PLUS Vixen+Losmandy dovetail clamp". Then you can connect the "PLUS 90mm Vixen dovetail bar" under the camera and then connect everything in the dovetail clamp. The guide scope is installed, using the optional 80mm PLUS guide rings and PLUS raisers, to be fixed on the side of EAGLE CORE.

     Add to cart
5. 

   ECCO2, environmental computerized controller for EAGLE [PRI-ECCO2]

   $198.90 USD

   specialorder

   Scheduled Delivery

   PrimaluceLab: ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point (the temperature below which dew condenses). This way it will vary the heating of dew heaters connected to the dew heater ports of the EAGLE avoiding condensation on your optics. It is automatic with this easy to use device. Just connect it to the EAGLE's USB port. For this reason we decided to call it ECCO. In Italian, it means "There you go!” The second generation ECCO now comes with USB-C type port, added pressure sensor, SMART control of temperature probes and DARK mode. ECCO2 is also provided with an ASCOM driver to control it also with third party software, also from standard Windows 10 computers!
   The EAGLE (starting with the second generation) has 3 0-12V, adjustable voltage power supply ports where you can connect your dew heaters without the need of an external controller. Using the EAGLE Manager software you can activate these ports and manually adjust the voltage to activate the relative dew heater. ECCO2 instead, thanks to the integration of appropriate temperature, humidity and pressure sensors, adds to the EAGLE dew heater power automatic control: by monitoring in real time the temperature of the optics of your instruments (through the appropriate probes, a maximum of 3 probes are supported), air temperature and humidity (via the sensors included in ECCO2 body), ECCO2 calculates the dew point and then automatically adjusts the power of your dew heaters to prevent any dewing!

   ECCO2 adds the automatic power control of dew heaters to EAGLE2, EAGLE3 and EAGLE4, but thanks to the provided ASCOM drivers, it can also be used as external environmental monitor with any standard computer with Windows 10 operative system.
   ECCO2, environmental computerized controller for EAGLE - main features:
   - Computerized controller to be installed on your telescope
   - Plug&Play: just connect to the EAGLE and it works!
   - USB Type C port with reversible plug: safe and reliable
   - It adds automatic power control to dew heaters connected to the dew ports of the EAGLE
   - Temperature, humidity and pressure sensors to automatically calculate dew point
   - 3x ports for temperature probes
   - DARK mode to disable the LED light
   - SMART control of temperature probes to automatically detect uncalibrated or wrongly connected temperature probes
   - ASCOM driver to control ECCO2 from external softwares or even standard Windows 10 computers
   - It supports compact guide scopes when used with “Guide scope support for ECCO”
   - Weight: 75 gr.
   We decided to call it ECCO not only because it is the “Environmental Computerized COntroller” but because it is also very easy to use (in Italian, ECCO means "There you go"). In fact, just connect the temperature sensors (to be fixed near the optics of your telescope) and the USB cable to one of the EAGLE USB ports (ECCO2 is compatible with EAGLE2, EAGLE3, and EAGLE4 equipped with dew heaters power ports), and press ECCO button in the EAGLE Manager. You can see in real time the dew point calculation, the temperature detected by the temperature probes you have installed and the variation of the power supplied by the EAGLE to the dew heaters. ECCO2 does not require external power supply and it comes with a sturdy USB-C port providing increased reliability with its reversible plug - You can connect the USB cable in either orientation, preventing problems when connecting the ECCO in the dark.

   ECCO2 can be installed on any Vixen-style finder shoe on all telescopes making it very easy to connect. If you do not have a finder base, you can use our optional “DX finder base” and then connect the ECCO2. We designed ECCO2 as an external module of the EAGLE and not as an integrated instrument because, if it were internal to the EAGLE, its measurements of temperature and humidity of the air would be influenced by the (even if weak) heat created by the EAGLE during use. With an external module, the data recorded by ECCO2 is precise and reliable. The new SMART control feature of the ECCO2 automatically detects uncalibrated temperature probes. If you happen to calibrate a temperature probe on one of the ECCO’s ports and then accidentally connect the same probe to a different port, the ECCO2 will automatically detect the error and show an alert message.

   Great PrimaLuceLab design
   As with all our products, ECCO2 offers you innovative features in a product characterized by refined design and high quality construction. Made entirely of 6061 T6 aluminum and produced using CNC machines, ECCO2 is completely red anodized to increase the strength and durability of the materials. It can also be used as a finder support by adding the optional "Guide scope support for ECCO". You can install your optical finder or guide scope above ECCO2 instead of using guide rings (this is a perfect solution, for example, for compact and very portable telescopes). ECCO2 is very compact and it weights only 75 gr.
   ASCOM driver available
   ECCO2 is provided also with an ASCOM driver that allows the use of ECCO2 with third party softwares. This allows you to import the ECCO2 sensors data in other applications and it allows the use of the ECCO2 also with standard Windows 10 computers. Please note that, by using the ECCO2 with a standard computer, you can use the ECCO2 to monitor air temperature, humidity and pressure but you can’t control dew heaters power in the same way you can do with the EAGLE. ECCO2 ASCOM driver requires ASCOM platform 6.4 or later.
   ECCO2 environmental computerized controller for EAGLE - scope of delivery
   - ECCO2

   - Adapter for Vixen-style finder shoe

   - 2 temperature probes

   - USB Type C cable - length 120cm

   - Quick guide

    

     Add to cart
6. 

   Guide scope support for ECCO [PRI-ECCOSUP]

   $80.58 USD

   2 in stock specialorder

   Scheduled Delivery

   PrimaluceLab: ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

     Add to cart
7. 

   Guide rings support plate for ECCO [PRI-ECCOSUP-PL]

   $23.46 USD

   specialorder

   Scheduled Delivery

   PrimaluceLab: Guide rings support plate for ECCO

    

     Add to cart
8. 

   12,8V AC adapter for EAGLE - 12A [PRI-PL1000057]

   $198.90 USD

   specialorder

   Scheduled Delivery

   PrimaluceLab: 12V power cable with cigarette plug for Eagle - 250cm

   The 12,8V AC adapter for EAGLE  - 12A" (PL1000024) has been replaced by the new "12,8V AC adapter for EAGLE  - 14A” (PL1000057) that is able to provide even more Amps, it comes with longer cords and better adapters for EU, UK and USA plugs.

   If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12V power supply comes with a screw connector for EAGLE on one side and a plug for the socket on the other (compatible with 100 to 240V).

   
   The 12A version has a slightly higher voltage (12.8V instead of the standard 12V) because when you are powering from the EAGLE many accessories with high current consumption, you can see a slight decrease in voltage which, in this way, it is perfectly balanced.

     Add to cart
9. 

   ECCO-NTC adapter for Dew Heater Rings [PRI-PL1000061]

   $117.30 USD

   specialorder

   Scheduled Delivery

   PrimaluceLab: ECCO-NTC is small and lightweight, allowing you to connect it to any standard Vixen-style finder shoe and it comes with 2 grub screws to attach the main body of ECCO2. ECCO-NTC does not require external power since it’s powered directly by ECCO2.

   This adapter is specifically designed to work with ECCO2 and it’s not compatible with the previous/first generation ECCO controller.

     Add to cart
10. 

    WiFi antennas for EAGLE [PRI-PL3600087]

    $25.50 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.

      Add to cart
11. 

    GPS antenna for EAGLE4 [PRI-PL3600088]

    $66.30 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.

      Add to cart
12. 

    Guide rings PLUS 115mm [PRI-PLLANGU115P]

    $107.10 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 115mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 80mm diameter refractors.

    Like all the other elements of the PLUS series, these guide rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as support rings, plates or dovetail clamps.
    The guide rings PLUS 115mm are part of our system PLUS (Prima Luce Universal System) which includes many guide rings, support rings, plates and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the guide rings PLUS 115mm. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

    Thanks to the particular design, the guide rings PLUS 115mm can be:

    screwed (with 2 screws each) directly on all the PLUS compatible support rings or with a single screw on support rings from other brands (which have a center hole).
    screwed (with 2 screws each) on the PLUS dovetail clamps: if you install a Vixen or Losmandy PLUS plate above the support rings of your telescope, you can slide the guide rings in the perfect position to properly balance the weight of the guide telescope.

    
    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these guide rings on plates or support rings through a screw.
     

      Add to cart
13. 

    Guide rings PLUS 80mm [PRI-PLLANGU80P]

    $66.30 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors.

    Like all the other elements of the PLUS series, these guide rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as support rings, plates or dovetail clamps.

    The guide rings PLUS 80mm are part of our system PLUS (Prima Luce Universal System) which includes many guide rings, support rings, plates and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. You can install the guide rings PLUS 80mm directly above the EAGLE using the 2 additional plates (which provide a flat base for optimal connection) and the 4 screws M5x12 supplied in the package.
    You can install the guide rings PLUS 80mm also above the PLUS support rings or above the PLUS Vixen or Losmandy style dovetail plate by using the 4 M6x12 screws supplied in the package.

    Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a central threaded hole (M6) that allows, for example, to connect on these guide rings on third party dovetail plates or support rings through a single screw.

    Scope of delivery: 2 guide rings with support screws for guide scope, 2 additional plates for installation on the EAGLE, 4 M5x12 screws, 4 M6x12 screws.
     

      Add to cart
14. 

    100mm PLUS support rings [PRI-PLLANSU100P]

    $249.90 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:  The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

    
    The 100mm PLUS can be used with Skywatcher ED80 or ED100 telescopes.

      Add to cart
15. 

    105mm PLUS support rings [PRI-PLLANSU105P]

    $264.18 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:  The 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

    
    The 105mm PLUS support rings are designed for refractors telescope that has plate for photographic tripods connection or for Vixen clamps

      Add to cart
16. 

    115mm PLUS support rings [PRI-PLLANSU115P]

    $274.38 USD

    1 in stock specialorder

    Scheduled Delivery

    PRIMALUCE: The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen ED103D, Takahashi TSA102.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

      Add to cart
17. 

    115mm PLUS support rings [PRI-PLLANSU115P]

    $274.38 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab:  The 115mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

    
    The 105mm PLUS support rings are designed for refractors telescope that has plate for photographic tripods connection or for Vixen clamps

      Add to cart
18. 

    125mm PLUS support rings [PRI-PLLANSU125P]

    $285.60 USD

    1 in stock specialorder

    Scheduled Delivery

    The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi FSQ106EDX, Takahashi TSA120.

    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

      Add to cart
19. 

    131mm PLUS support rings [PRI-PLLANSU131P]

    $321.30 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical element
    The 131mm PLUS support rings can be used with different brands telescopes (such as 100-130mm diameter refractors) with 131mm in diameter optical tube.

    Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED.s such as plates, guide rings or dovetail clamps.

    The 131mm PLUS support rings are part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. For this application, we designed many elements, including the 131mm PLUS support rings. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

    Thanks to the particular design, the 131mm PLUS support rings are equipped with holes (above and below each ring) to permit the attachment of:

    Vixen or Losmandy plates below the rings to install the telescope on any mount
    PLUS guide rings (each ring can be fixed on the support ring with 2 screws)
    Vixen or Losmandy plates above the rings to increase the rigidity of the mechanical system and enable to install other accessories, such as dovetail clamps with guide rings to precisely adjust the position of the guide telescope.
     

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these support rings plate or guide rings through a screw.

      Add to cart
20. 

    80mm PLUS support rings [PRI-PLLANSU80E]

    $162.18 USD

    2 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:  The 80mm PLUS support rings can be used with various brands telescopes (for example refractors 60-70mm in diameter) with 80mm diameter tube. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.
    The 80mm PLUS support rings are part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the 80mm PLUS support rings. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

     

    Thanks to the particular design, the 80mm PLUS support rings are equipped with holes (above and below each ring) to permit the attachment of:

    Vixen or Losmandy plates below the rings to install the telescope on any mount
    PLUS guide rings (each ring can be fixed on the support ring with 2 screws)
    Vixen or Losmandy plates above the rings to increase the rigidity of the mechanical system and enable to install other accessories, such as dovetail clamps with guide rings to precisely adjust the position of the guide telescope.
     
    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these support rings plate or guide rings through a screw.

      Add to cart
21. 

    85mm PLUS support rings [PRI-PLLANSU85P]

    $219.30 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:  T

    85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

      Add to cart
22. 

    90mm PLUS support rings [PRI-PLLANSU90P]

    $229.50 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab:  The 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

      Add to cart
23. 

    95mm PLUS support rings [PRI-PLLANSU95P]

    $239.70 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:  The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL.

    
    Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

      Add to cart
24. 

    Losmandy plate 140mm PLUS [PRI-PLLLOS140P]

    $49.98 USD

    9 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The Losmandy style dovetail plate 140mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the Losmandy style dovetail plate 140mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
    Thanks to the particular design, the Losmandy style dovetail plate 140mm PLUS can be:

    1. positioned below the support rings to install the telescope on mounts with Losmandy plate
    2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    3. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
25. 

    Losmandy plate 240mm PLUS [PRI-PLLLOS240P]

    $75.48 USD

    2 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: Losmandy plate 240mm PLUS
    The Losmandy plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8).

    
    Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.
    The Losmandy plate 240mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the Losmandy plate 240mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation
    Thanks to the particular design, the Losmandy plate 240mm PLUS can be:

    -positioned below the support rings to install the telescope on mounts with Losmandy plate
    -installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    -used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.
    In the picture above, the Losmandy plate 240mm PLUS is installed below 105mm PLUS support rings. Above the support rings the EAGLE is installed with 115mm PLUS guide rings. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.
     

      Add to cart
26. 

    Losmandy plate 350mm PLUS [PRI-PLLLOS350P]

    $90.78 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The Losmandy style dovetail plate 350mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the Losmandy style dovetail plate 350mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation

    Thanks to the particular design, the Losmandy style dovetail plate 350mm PLUS can be:

    1. positioned below the support rings to install the telescope on mounts with Losmandy plate
    2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    3. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.

     In the picture above, the Losmandy style dovetail plate 350mm PLUS is installed below 145mm PLUS support rings. Above the support rings the EAGLE is installed. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
27. 

    Losmandy plate 495mm PLUS [PRI-PLLLOS495P]

    $111.18 USD

    2 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8).

    Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.
    Thanks to the particular design, the Losmandy style dovetail plate 495mm PLUS can be:

    1. positioned below the support rings to install the telescope on mounts with Losmandy plate
    2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    3. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS. 

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
28. 

    Losmandy plate 645mm PLUS [PRI-PLLLOS645P]

    $162.18 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: to fix on this plate support or guide rings through a screw.

      Add to cart
29. 

    Dovetail Clamp Vixen+Losmandy PLUS [PRI-PLLMORVLP]

    $69.36 USD

    17 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:

    Dovetail Clamp Vixen+Losmandy PLUS
    The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance).

    
    Our dovetail clamps, unlike the common ones, offer simultaneously the attack for Vixen and Losmandy plates. In this way you will be free to install the plates you want and you do not need to change them if they will replace your telescope support plates!

    The Dovetail Clamp Vixen+Losmandy PLUS is part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.
    For this application, we designed many elements, including the dovetail Clamp Vixen+Losmandy PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

    Thanks to the particular design, the Dovetail Clamp Vixen+Losmandy PLUS can be:

    -Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either with Vixen or Losmandy connection plate for different mounts.

    -installed over a Vixen or Losmandy plate positioned above the telescope support ring: if you install a Vixen or Losmandy PLUS plate above the support rings of your telescope, you can scroll through these dovetail clamps (with the guide rings screwed on) in perfect position to properly balance the weight of the guide telescope.
     

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these dovetail clamps on plates or rings through a screw.
     

      Add to cart
30. 

    Big Dovetail Clamp Vixen+Losmandy PLUS [PRI-PLLMORVLPB]

    $147.90 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: The Big Dovetail Clamp Vixen+Losmandy PLUS is part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. The Big Dovetail Clamp Vixen+Losmandy PLUS is designed to support heavy loads.
    For this application, we designed many elements, including the dovetail Clamp Vixen+Losmandy PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

     

    Thanks to the particular design, the Dovetail Clamp Vixen+Losmandy PLUS can be:

    Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either with Vixen or Losmandy connection plate for different mounts.
    installed over a Vixen or Losmandy plate positioned above the telescope support ring: if you install a Vixen or Losmandy PLUS plate above the support rings of your telescope, you can scroll through these dovetail clamps (with the guide rings screwed on) in perfect position to properly balance the weight of the guide telescope.
    Installed on Egle to connect it on Vixen and Losmandy style dovetails.
    With the right flange it allows to connect also Losmandy dovetail telescope on Skywatcher HEQ5 and AZ-EQ5 mount
     

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these dovetail clamps on plates or rings through a screw.
     

      Add to cart
31. 

    Maxi Dovetail Clamp Vixen+Losmandy PLUS [PRI-PLLMORVLPM]

    $201.96 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original mount clamp.

    Our dovetail clamps, unlike the common ones, offer simultaneously the connection for Vixen and Losmandy plates. In this way you will be free to install the plates you want and you do not need to change them if they will replace your telescope support plates! The Maxi Dovetail Clamp Vixen+Losmandy PLUS is part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. The Maxi Dovetail Clamp Vixen+Losmandy PLUS is designed to support heavy loads. For this application, we designed many elements, including the Maxi Dovetail Clamp Vixen+Losmandy PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

     

    Thanks to the particular design, the Maxi Dovetail Clamp Vixen+Losmandy PLUS can be:

    Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either ;with Vixen or Losmandy connection plate for different mounts.
    installed over a Vixen or Losmandy plate positioned above the telescope support ring: if you install a Vixen or Losmandy PLUS plate above the support rings of your telescope, you can scroll through these dovetail clamps (with the guide rings screwed on) in perfect position to properly balance the weight of the guide telescope.
    Installed on the mounts instead of the original clamp
     

    If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these dovetail clamps on plates or rings through a screw.

      Add to cart
32. 

    Observatory Dovetail Clamp Vixen+Losmandy PLUS [PRI-PLLMORVLPO]

    $402.90 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Observatory Dovetail Clamp Vixen+Losmandy PLUS

      Add to cart
33. 

    Side by side Losmandy plate 240mm PLUS (n.2 PLLMORVLP + PLLLOS240P) [PRI-PLLPDLOS240P]

    $214.20 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Losmandy plate 240mm PLUS (n.2 PLLMORVLP + PLLLOS240P)

      Add to cart
34. 

    Side by side Losmandy plate 240mm PLUS large dovetail clamps (n.2 PLLMORVLPB + PLLLOS240P) [PRI-PLLPDLOS240PL]

    $371.28 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Losmandy plate 240mm PLUS large dovetail clamps (n.2 PLLMORVLPB + PLLLOS240P) 

      Add to cart
35. 

    Side by side Losmandy plate 350mm PLUS (n.2 PLLMORVLP + PLLLOS350P) [PRI-PLLPDLOS350P]

    $229.50 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Losmandy plate 350mm PLUS (n.2 PLLMORVLP + PLLLOS350P)

      Add to cart
36. 

    Side by side Losmandy plate 350mm PLUS large dovetail clamps (n.2 PLLMORVLPB + PLLLOS350P) [PRI-PLLPDLOS350PL]

    $229.50 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Losmandy plate 350mm PLUS large dovetail clamps (n.2 PLLMORVLPB + PLLLOS350P) 

      Add to cart
37. 

    Side by side Losmandy plate 495mm PLUS maxi dovetail clamps (n.2 PLLMORVLPM + PLLLOS495P) [PRI-PLLPDLOS495PM]

    $515.10 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Losmandy plate 350mm PLUS large dovetail clamps (n.2 PLLMORVLPB + PLLLOS350P) 

      Add to cart
38. 

    Side by side Vixen plate 240mm PLUS (n.2 PLLMORVLP + PLLVIX240P) [PRI-PLLPDVIX240P]

    $198.90 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Vixen plate 240mm PLUS (n.2 PLLMORVLP + PLLVIX240P)

      Add to cart
39. 

    Side by side Vixen plate 350mm PLUS (n.2 PLLMORVLP + PLLVIX350P) [PRI-PLLPDVIX350P]

    $219.30 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Side by side Vixen plate 350mm PLUS (n.2 PLLMORVLP + PLLVIX350P)

      Add to cart
40. 

    PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" [PRI-PLLSAG925]

    $70.38 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"

    If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm Losmandy PLUS dovetail bar on the telescope.
    The PLUS curved blocks can be easily installed on Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescopes. Simply remove the screws already on the telescope and fix the curved blocks (one in front, one in rear of the optical tube) and secure with the same screws. On the curved blocks you can then connect the 350mm or 495mm PLUS Losmandy dovetail bar using 2 M6 screws for each curved block (included in the box).

      Add to cart
41. 

    PLUS 10mm spacers [PRI-PLLSPES10]

    $29.58 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).
    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.

    The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.
     

      Add to cart
42. 

    PLUS 20mm spacers [PRI-PLLSPES20]

    $42.84 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (35mm) which are provided in the package (4 screws).
    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.
    The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (35mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.

      Add to cart
43. 

    PLUS 30mm spacers [PRI-PLLSPES30]

    $47.94 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).
    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.

    The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.
     

      Add to cart
44. 

    Vixen plate 140mm PLUS [PRI-PLLVIX140P]

    $39.78 USD

    specialorder

    Scheduled Delivery

    PrimaluceLab: Vixen plate 140mm PLUS
    The Vixen plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Vixen plate (as the SkyWatcher EQ5, HEQ5 or EQ6).

    
    Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.
    The Vixen plate 140mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the Vixen plate 140mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

    Thanks to the particular design, the Vixen plate 140mm PLUS can be:
    - positioned below the support rings to install the telescope on mounts with Vixen plate
    - installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    - used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Vixen plate) together with 2 dovetail clamps PLUS.

    The Vixen plate 140mm PLUS is installed below 105mm PLUS support rings. Above the support rings the EAGLE CORE is installed with  80mm PLUS guide rings. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
45. 

    Vixen plate 240mm PLUS [PRI-PLLVIX240P]

    $60.18 USD

    1 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The Vixen plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 240mm long and is useful for installing medium dimensions telescopes (as refractors up to 130mm or reflectors up to 200mm in diameter) on mounts with Vixen plate (as the SkyWatcher EQ5, HEQ5 or EQ6).

    
    Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.

    The Vixen plate 240mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

    For this application, we designed many elements, including the Vixen plate 240mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
    Thanks to the particular design, the Vixen plate 240mm PLUS can be:

    -positioned below the support rings to install the telescope on mounts with Vixen plate
    -installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    -used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Vixen plate) together with 2 dovetail clamps PLUS.

    The Vixen plate 240mm PLUS is installed below 105mm PLUS support rings. Above the support rings the EAGLE is installed with 80mm PLUS guide rings. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
46. 

    Vixen plate 350mm PLUS [PRI-PLLVIX350P]

    $80.58 USD

    2 in stock specialorder

    Scheduled Delivery

    PrimaluceLab: The Vixen style dovetail plate 350mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. For this application, we designed many elements, including the Vixen style dovetail plate 350mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
    Thanks to the particular design, the Vixen style dovetail plate 350mm PLUS can be:

    1. positioned below the support rings to install the telescope on mounts with Vixen plate
    2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
    3. installed below a camera to connect it to a mount with Vixen dovetail clamp
    4. installed below a telescope or a camera to connect it to a photographic head with Arca Swiss dovetail clamp
    5. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Vixen plate) together with 2 dovetail clamps PLUS.

    In the picture above, the Vixen style dovetail plate 350mm PLUS is installed below 145mm PLUS support rings. Above the support rings the EAGLE is installed. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

      Add to cart
47. 

    Vixen plate 90mm PLUS [PRI-PLLVIX90P]

    $34.68 USD

    5 in stock specialorder

    Scheduled Delivery

    PrimaluceLab:The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support rings, guide rings, dovetail clamps or EAGLE computers always with more crews, in order to avoid any flexure! Like all the elements of the PLUS system, this plate is made with high precision mechanics, it's built with CNC machines from aluminum block) and anodized to increase the hardness of the material and protect it from oxidation.
    Thanks to the particular design, the Vixen style dovetail plate 90mm PLUS can be:

    1. positioned below the support rings to install the telescope on mounts with Vixen plate
    2. installed below a camera to connect it to a mount with Vixen dovetail clamp
    3. installed below a telescope or a camera to connect it to a photographic head with Arca Swiss dovetail clamp
    4. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).

     Vixen style dovetail plate 90mm PLUS installed below a camera: this way you can connect the camera on a photographic head (to the left) or to a mount (to the right) in the same way of a telescope.

      Add to cart