Jump to content

Canada's top-tier Telescopes & Accessories
Be as specific as possible when reporting issues and *ALWAYS* include the full version number of the application you are using and your exact *CAMERA MODEL*
NEVER POST YOUR KEY IN ANY PUBLIC FORUM, INCLUDING THE O'TELESCOPE SUPPORT FORUM ::: IF YOU DO YOUR KEY WILL BE DEACTIVATED WITHOUT NOTICE!
  • 0

Mirror Lock on D5200


gbalstad

Question

  • Answers 7
  • Created
  • Last Reply

7 answers to this question

Recommended Posts

Greetings,

 

 

I cannot get my D5200 do work with the mirror lock function, it won't go into "anti-vibrate" mode. Has anyone else encountered this?

 

Is there a guide or manual for BackyardNikon?

 

Gunnar

 

Mirror lock is not supported in V1 of BYN over camera supplied usb cable.

 

It works with a serial cable but not regular USB cables.

 

 

 

Link to comment
Share on other sites

Greetings,

 

 

I cannot get my D5200 do work with the mirror lock function, it won't go into "anti-vibrate" mode. Has anyone else encountered this?

 

Is there a guide or manual for BackyardNikon?

 

Gunnar

 

Mirror lock is not supported in V1 of BYN over camera supplied usb cable.

 

It works with a serial cable but not regular USB cables.

 

 

 

Will future versions support the "mirror lock" and "anti-vibrate" functions?

 

Also, I read that the serial usb will only support the BULB function, and not the mirror luck.

 

Can you confirm this?

 

Right now most functions work using the regular Nikon USB with my D5200,  I just can't get the "anti-vibrate" function to work.

 

Thanks so much for your time and support.

 

Gunnar

 

 

Link to comment
Share on other sites

Greetings,

 

 

I cannot get my D5200 do work with the mirror lock function, it won't go into "anti-vibrate" mode. Has anyone else encountered this?

 

Is there a guide or manual for BackyardNikon?

 

Gunnar

 

Mirror lock is not supported in V1 of BYN over camera supplied usb cable.

 

It works with a serial cable but not regular USB cables.

 

 

 

Will future versions support the "mirror lock" and "anti-vibrate" functions?

 

Also, I read that the serial usb will only support the BULB function, and not the mirror luck.

 

Can you confirm this?

 

Right now most functions work using the regular Nikon USB with my D5200,  I just can't get the "anti-vibrate" function to work.

 

Thanks so much for your time and support.

 

Gunnar

 

 

Mirror lock should work with a serial cable, I have tested it on a D5100, D7000, and D810 myself.

 

Regards,

Link to comment
Share on other sites

Greetings,

 

 

I cannot get my D5200 do work with the mirror lock function, it won't go into "anti-vibrate" mode. Has anyone else encountered this?

 

Is there a guide or manual for BackyardNikon?

 

Gunnar

 

Mirror lock is not supported in V1 of BYN over camera supplied usb cable.

 

It works with a serial cable but not regular USB cables.

 

 

 

Will future versions support the "mirror lock" and "anti-vibrate" functions?

 

Also, I read that the serial usb will only support the BULB function, and not the mirror luck.

 

Can you confirm this?

 

Right now most functions work using the regular Nikon USB with my D5200,  I just can't get the "anti-vibrate" function to work.

 

Thanks so much for your time and support.

 

Gunnar

 

 

Mirror lock should work with a serial cable, I have tested it on a D5100, D7000, and D810 myself.

 

Regards,

 

Could you post a picture of what a good serial cable looks like, and perhaps provide some preferred sources for the cable?

 

Thanks so much.

 

Gunnar

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...

Important Information

This site uses cookies to offer your a better browsing experience. You can adjust your cookie settings. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies, our Privacy Policy, and our Terms of Use