Random "abort" during a photo series

[aerodave3]

OK so I was shooting the horse head nebula the other night using my Nikon D800 and BYN V 2.0.10. I set it to take 40 subs, 2 minutes each. After taking a few subs it would flash the abort message briefly and stop the entire sequence. I would then start it over and after as few as a couple of exposures it would abort again! It would not complete the series. I have been using BYN for a couple of years and have never had that problem before. I am running Windows 10.0.17763 on my laptop.

Any ideas as to what was causing this?

I will include the log

Aerodave3

logfile-[20191223-20h09m46s537]-[18348]-2019-12-23.txt

[admin]

You have a few different errors in your log file.  It's hard to tell which one (if any) relates to your issue.

Do you have a specific time when this occured?  I could correlate that to the log file and go from there.

Regards,

[aerodave3]

It occurred throughout the session. Not sure the times. I think the most exposures in a row was maybe 7. Then it would abort and I had to start it again.

[admin]

Did you notice if this occurs only when you image with a camera lens?

[aerodave3]

I was imaging with a camera lens when it happened but that is usually what I have imaged with in the past.

[admin]

Can you please download the latest version 2.0.11 and see if you still get the error.  Send me that log file if it happens again.

Regards,