D800 Crash

[jerryyyyy]

Have a licensed copy BackyardEOS and downloaded the Beta2 for my D800.  Looks familiar but has been crashing when I try to take a series of images.  The log follows.

 

Also my license runs out in 3 days?  What to do?

 

20:27:58  Licensed to Beta02 TESTER (support@binaryrivers.com)

20:29:12  Nikon drivers initialized.

20:30:26  Attempting to connect camera...

20:30:35  D800 CONNECTED!

20:59:59  Imaging session started.

21:00:08  Imaging session cancelled

21:00:08  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 460516564)

21:00:16  Imaging session cancelled

21:00:59  IMAGE_20140707-21h00m47s333ms.JPG

21:02:02  IMAGE_20140707-21h01m53s439ms.NEF

21:03:25  Imaging session started.

21:03:59  Imaging session cancelled

21:03:59  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 386001540)

21:04:08  Imaging session cancelled

21:04:27  Imaging session started.

21:04:47  Imaging session cancelled

21:04:47  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 449701300)

21:04:57  Imaging session cancelled

[admin]

Have a licensed copy BackyardEOS and downloaded the Beta2 for my D800.  Looks familiar but has been crashing when I try to take a series of images.  The log follows.

 

Also my license runs out in 3 days?  What to do?

 

20:27:58  Licensed to Beta02 TESTER (support@binaryrivers.com)

20:29:12  Nikon drivers initialized.

20:30:26  Attempting to connect camera...

20:30:35  D800 CONNECTED!

20:59:59  Imaging session started.

21:00:08  Imaging session cancelled

21:00:08  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 460516564)

21:00:16  Imaging session cancelled

21:00:59  IMAGE_20140707-21h00m47s333ms.JPG

21:02:02  IMAGE_20140707-21h01m53s439ms.NEF

21:03:25  Imaging session started.

21:03:59  Imaging session cancelled

21:03:59  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 386001540)

21:04:08  Imaging session cancelled

21:04:27  Imaging session started.

21:04:47  Imaging session cancelled

21:04:47  [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapStart, 33560, kNkMAIDDataType_GenericPtr, 449701300)

21:04:57  Imaging session cancelled

 

That is not a crash, it just failed to read a value.  Send me the FULL log file in "My Pictures\BackyardTEMP\logs"

 

Install BETA 02b in a seperate folder and this should solve the key issue, you should be good until September.

 

Regards.

[jerryyyyy]

Here are the logs.  Does it matter where the folder for the install is located?  I guess I can put it on root (C:).

[jerryyyyy]

Installed in the C: directory and still says expires in 2 days.  And got the same error when I tried to take an image.  All settings default.

 

Looking at your web site I see that Bulb Captures for the D800 do not work according to the grid.  I guess I can check back in later.  You should not feel bad as it does not work for Maxil DL either.  I am sure you are aware of some open source projects where the D800 does work.  I wonder what that code looks like.

[admin]

Here are the logs.  Does it matter where the folder for the install is located?  I guess I can put it on root (C:).

 

Thanks, but those log files are from BETA02, not the latest BETA 02b <_>

 

I'll take a peek still.

 

Regards,

[admin]

Installed in the C: directory and still says expires in 2 days.  And got the same error when I tried to take an image.  All settings default. 

 

As I said a few times already, install BETA 02b in a separate folder and you'll get a 60-day tester key.

 

Regards,