Navigating Tariffs: Due to the current volatile tariff environment and associated logistics challenges, O'Telescope is unable to fulfill shipments to the United States. Orders submitted with a U.S. shipping address will be refunded, with the payment gateway transaction fee deducted. This restriction does not affect BackyardEOS or BackyardNIKON, which remain available as digital downloads.

Inventory closeout sale, everything must go. Up to 35% off. Some conditions apply.

We are closing our inventory side of the business and focusing solely on software - going back to our roots so to speak. No store coupons required, all prices have been marked down. First come, first served, until quantities last. We are no longer placing orders with manufacturers. Absolutely no rain checks. We reserve the right to cancel and refund orders at our sole discretion. We do our best to maintain our inventory accurate, but mistakes do happen, if you purchase an item that is no longer in stock, you will be refunded. The sale does not apply to some higher-end items such as 10Micron. Prices subject to change without notice. ALL SALES ARE FINAL.

Occasionally, we find a box under a box under a box in the back of the warehouse with hidden treasures, and when we do, we add these items on the site, so even though you may not find what you're looking for today, it could automagically appear next week.

----------

Eagle

PrimaLuceLab creates innovative products for astronomy like EAGLE control unit, SESTO SENSO motorized focuser, ECCO environmental controller and PLUS mechanical system.

19 products

Sort By

Guide scope support for ECCO [PRI-ECCOSUP]

$100.03 CAD ~~$121.99 CAD~~

2 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

Add to cart
100mm PLUS support rings [PRI-PLLANSU100P]

$301.62 CAD ~~$367.83 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

The 100mm PLUS can be used with Skywatcher ED80 or ED100 telescopes.

Add to cart
105mm PLUS support rings [PRI-PLLANSU105P]

$318.62 CAD ~~$388.56 CAD~~

specialorder On sale

PrimaluceLab: The 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

The 105mm PLUS support rings are designed for refractors telescope that has plate for photographic tripods connection or for Vixen clamps

Out of Stock
115mm PLUS support rings [PRI-PLLANSU115P]

$330.76 CAD ~~$403.37 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PRIMALUCE: The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen ED103D, Takahashi TSA102.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

Add to cart
125mm PLUS support rings [PRI-PLLANSU125P]

$344.12 CAD ~~$419.66 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi FSQ106EDX, Takahashi TSA120.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

Add to cart
131mm PLUS support rings [PRI-PLLANSU131P]

$386.62 CAD ~~$471.49 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical element
The 131mm PLUS support rings can be used with different brands telescopes (such as 100-130mm diameter refractors) with 131mm in diameter optical tube.

Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED.s such as plates, guide rings or dovetail clamps.

The 131mm PLUS support rings are part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. For this application, we designed many elements, including the 131mm PLUS support rings. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

Thanks to the particular design, the 131mm PLUS support rings are equipped with holes (above and below each ring) to permit the attachment of:

Vixen or Losmandy plates below the rings to install the telescope on any mount
PLUS guide rings (each ring can be fixed on the support ring with 2 screws)
Vixen or Losmandy plates above the rings to increase the rigidity of the mechanical system and enable to install other accessories, such as dovetail clamps with guide rings to precisely adjust the position of the guide telescope.

If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these support rings plate or guide rings through a screw.

Add to cart
80mm PLUS support rings [PRI-PLLANSU80E]

$197.19 CAD ~~$240.47 CAD~~

2 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: The 80mm PLUS support rings can be used with various brands telescopes (for example refractors 60-70mm in diameter) with 80mm diameter tube. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.
The 80mm PLUS support rings are part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

For this application, we designed many elements, including the 80mm PLUS support rings. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

Thanks to the particular design, the 80mm PLUS support rings are equipped with holes (above and below each ring) to permit the attachment of:

Vixen or Losmandy plates below the rings to install the telescope on any mount
PLUS guide rings (each ring can be fixed on the support ring with 2 screws)
Vixen or Losmandy plates above the rings to increase the rigidity of the mechanical system and enable to install other accessories, such as dovetail clamps with guide rings to precisely adjust the position of the guide telescope.

If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these support rings plate or guide rings through a screw.

Add to cart
85mm PLUS support rings [PRI-PLLANSU85P]

$265.19 CAD ~~$323.40 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: T

85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

Add to cart
95mm PLUS support rings [PRI-PLLANSU95P]

$289.48 CAD ~~$353.02 CAD~~

specialorder On sale

PrimaluceLab: The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL.

Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical elements such as plates, guide rings or dovetail clamps.

Out of Stock
Losmandy plate 140mm PLUS [PRI-PLLLOS140P]

$63.61 CAD ~~$77.57 CAD~~

9 in stock specialorder On sale
Scheduled Delivery
PrimaluceLab: The Losmandy style dovetail plate 140mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

For this application, we designed many elements, including the Losmandy style dovetail plate 140mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
Thanks to the particular design, the Losmandy style dovetail plate 140mm PLUS can be:
1. positioned below the support rings to install the telescope on mounts with Losmandy plate
2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
3. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.
If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.
Add to cart
Losmandy plate 240mm PLUS [PRI-PLLLOS240P]

$93.96 CAD ~~$114.59 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: Losmandy plate 240mm PLUS
The Losmandy plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8).

Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.
The Losmandy plate 240mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

For this application, we designed many elements, including the Losmandy plate 240mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation
Thanks to the particular design, the Losmandy plate 240mm PLUS can be:

-positioned below the support rings to install the telescope on mounts with Losmandy plate
-installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
-used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.
In the picture above, the Losmandy plate 240mm PLUS is installed below 105mm PLUS support rings. Above the support rings the EAGLE is installed with 115mm PLUS guide rings. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

Add to cart
Losmandy plate 495mm PLUS [PRI-PLLLOS495P]

$136.46 CAD ~~$166.42 CAD~~

specialorder On sale
PrimaluceLab: The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8).

Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.
Thanks to the particular design, the Losmandy style dovetail plate 495mm PLUS can be:
1. positioned below the support rings to install the telescope on mounts with Losmandy plate
2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
3. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Losmandy plate) together with 2 dovetail clamps PLUS.
If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.
Out of Stock
Dovetail Clamp Vixen+Losmandy PLUS [PRI-PLLMORVLP]

$86.67 CAD ~~$105.70 CAD~~

14 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab:

Dovetail Clamp Vixen+Losmandy PLUS
The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance).

Our dovetail clamps, unlike the common ones, offer simultaneously the attack for Vixen and Losmandy plates. In this way you will be free to install the plates you want and you do not need to change them if they will replace your telescope support plates!

The Dovetail Clamp Vixen+Losmandy PLUS is part of our system PLUS (Prima Luce Universal System) which includes a large variety of support rings, plates, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical system of support, depending on the application that you want to achieve. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.
For this application, we designed many elements, including the dovetail Clamp Vixen+Losmandy PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.

Thanks to the particular design, the Dovetail Clamp Vixen+Losmandy PLUS can be:

-Installed (2 dovetail clamps) on any of our PLUS plates to achieve a side-by-side plate (which allows you to install two telescopes in parallel on the same mount). Thanks to the presence of all necessary threaded holes, you can create side-by-side plates either with Vixen or Losmandy connection plate for different mounts.

-installed over a Vixen or Losmandy plate positioned above the telescope support ring: if you install a Vixen or Losmandy PLUS plate above the support rings of your telescope, you can scroll through these dovetail clamps (with the guide rings screwed on) in perfect position to properly balance the weight of the guide telescope.

If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on these dovetail clamps on plates or rings through a screw.

Add to cart
PLUS 10mm spacers [PRI-PLLSPES10]

$39.32 CAD ~~$47.95 CAD~~

specialorder On sale

PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.

The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.

Out of Stock
PLUS 20mm spacers [PRI-PLLSPES20]

$55.10 CAD ~~$67.20 CAD~~

specialorder On sale

PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (35mm) which are provided in the package (4 screws).
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.
The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (35mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.

Out of Stock
PLUS 30mm spacers [PRI-PLLSPES30]

$61.17 CAD ~~$74.60 CAD~~

1 in stock specialorder On sale
Scheduled Delivery

PrimaluceLab: When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars.

The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws). In the image above, the PLUS spacers have been installed between a PLUS Losmandy dovetail bar and PLUS support rings.

Add to cart
Vixen plate 240mm PLUS [PRI-PLLVIX240P]

$75.74 CAD ~~$92.37 CAD~~

specialorder On sale

PrimaluceLab: The Vixen plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 240mm long and is useful for installing medium dimensions telescopes (as refractors up to 130mm or reflectors up to 200mm in diameter) on mounts with Vixen plate (as the SkyWatcher EQ5, HEQ5 or EQ6).

Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.

The Vixen plate 240mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort.

For this application, we designed many elements, including the Vixen plate 240mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
Thanks to the particular design, the Vixen plate 240mm PLUS can be:

-positioned below the support rings to install the telescope on mounts with Vixen plate
-installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
-used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Vixen plate) together with 2 dovetail clamps PLUS.

The Vixen plate 240mm PLUS is installed below 105mm PLUS support rings. Above the support rings the EAGLE is installed with 80mm PLUS guide rings. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.

Out of Stock
Vixen plate 350mm PLUS [PRI-PLLVIX350P]

$100.03 CAD ~~$121.99 CAD~~

1 in stock specialorder On sale
Scheduled Delivery
PrimaluceLab: The Vixen style dovetail plate 350mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum freedom to build your mechanical support system, depending on the application you want to accomplish. Indeed, all the PLUS elements have threaded holes, holes and slots suitable for connecting elements, always with maximum rigidity and comfort. For this application, we designed many elements, including the Vixen style dovetail plate 350mm PLUS. Each component of the PLUS system is made of aluminum blocks that are high precision CNC machined. The aluminum is then sandblasted to achieve a very smooth surface finish and is anodized (hard anodizing) to increase the hardness of the material and protect it from oxidation.
Thanks to the particular design, the Vixen style dovetail plate 350mm PLUS can be:
1. positioned below the support rings to install the telescope on mounts with Vixen plate
2. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
3. installed below a camera to connect it to a mount with Vixen dovetail clamp
4. installed below a telescope or a camera to connect it to a photographic head with Arca Swiss dovetail clamp
5. used as a basis to create a side-by-side plate (which allows you to install two telescopes in parallel on a mount with a single Vixen plate) together with 2 dovetail clamps PLUS.
In the picture above, the Vixen style dovetail plate 350mm PLUS is installed below 145mm PLUS support rings. Above the support rings the EAGLE is installed. If you have other brands mechanical accessories, you can still use all the elements of the PLUS system. Indeed we have provided a series of central slots that allow, for example, to fix on this plate support or guide rings through a screw.
Add to cart
Vixen plate 90mm PLUS [PRI-PLLVIX90P]

$45.39 CAD ~~$55.35 CAD~~

5 in stock specialorder On sale
Scheduled Delivery
PrimaluceLab:The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support rings, guide rings, dovetail clamps or EAGLE computers always with more crews, in order to avoid any flexure! Like all the elements of the PLUS system, this plate is made with high precision mechanics, it's built with CNC machines from aluminum block) and anodized to increase the hardness of the material and protect it from oxidation.
Thanks to the particular design, the Vixen style dovetail plate 90mm PLUS can be:
1. positioned below the support rings to install the telescope on mounts with Vixen plate
2. installed below a camera to connect it to a mount with Vixen dovetail clamp
3. installed below a telescope or a camera to connect it to a photographic head with Arca Swiss dovetail clamp
4. installed above the support rings to increase the mechanical rigidity of the entire telescope (and allow you to attach other accessories such as guide rings to precisely adjust the position of the guide telescope).
Vixen style dovetail plate 90mm PLUS installed below a camera: this way you can connect the camera on a photographic head (to the left) or to a mount (to the right) in the same way of a telescope.
Add to cart