Jump to content

Canada's top-tier Telescopes & Accessories
Click or hover over image to zoom in
Product may not be exactly as shown

ProLine PL4720-MB CCD Monochrome Cooled Camera CCD47-20-1-339 Back Illuminated AIMO midband AR coating (no shutter) [FLI-PL4720-MB]

FLI-PL4720-MB
$19,852.50 USD
Availability: usually ships within 10-14 days
Flight Lakes Instrumentation: ProLine PL4720-MB CCD Monochrome Cooled Camera CCD47-20-1-339 Back Illuminated AIMO midband AR coating (no shutter) - 1024 x 1024 Array with 13 µm pixels
ProLine sets the standards in key performance areas that include: download speeds, cooling, low noise operation, anti-ghosting technology, image quality, and linearity. 
ProLine download speeds are fast while maintaining low noise frame quality. 
ProLine achieves outstanding cooling without water assist. simply set the ProLine cooling where you want it and thecamera will do the rest -- quickly and without worries. 
ProLine frame quality is second to none thanks to careful design, implementation, and setup. 
All cameras are assembled in our clean room under exacting conditions and
must pass a battery of tests before being shipped. 
The PL4720 uses a back-illuminated frame transfer sensor from e2v technologies. 
Half of the sensor is covered with a metal mask; half is exposed to light.
The exposed side of the sensor is centered in the camera aperture. 
The image is moved from the exposed side to the masked side in about 10 milliseconds, then read out from the masked side while a new exposure is integrating on the exposed side. (Therefore, frame-to-frame timing depends in great part on the digitization speed.) The default configuration for the camera is two channel readout with software-selectable digitization speeds of 500 kHz and 2 MHz per channel. (Single channel readout is available on request, as are different digitization speeds.)

About ProLine PL4720-MB CCD Monochrome Cooled Camera CCD47-20-1-339 Back Illuminated AIMO midband AR coating (no shutter) [FLI-PL4720-MB]

Flight Lakes Instrumentation: ProLine PL4720-MB CCD Monochrome Cooled Camera CCD47-20-1-339 Back Illuminated AIMO midband AR coating (no shutter) - 1024 x 1024 Array with 13 µm pixels

ProLine sets the standards in key performance areas that include: download speeds, cooling, low noise operation, anti-ghosting technology, image quality, and linearity. 
ProLine download speeds are fast while maintaining low noise frame quality. 
ProLine achieves outstanding cooling without water assist. simply set the ProLine cooling where you want it and thecamera will do the rest -- quickly and without worries. 
ProLine frame quality is second to none thanks to careful design, implementation, and setup. 
All cameras are assembled in our clean room under exacting conditions and
must pass a battery of tests before being shipped. 

The PL4720 uses a back-illuminated frame transfer sensor from e2v technologies. 
Half of the sensor is covered with a metal mask; half is exposed to light.
The exposed side of the sensor is centered in the camera aperture. 
The image is moved from the exposed side to the masked side in about 10 milliseconds, then read out from the masked side while a new exposure is integrating on the exposed side. (Therefore, frame-to-frame timing depends in great part on the digitization speed.) The default configuration for the camera is two channel readout with software-selectable digitization speeds of 500 kHz and 2 MHz per channel. (Single channel readout is available on request, as are different digitization speeds.)

PL4720 MB or BB Sensor Specs

  • Sensor:    e2v CCD47-20-1-339 (MB) or -331(BB)
  • Pixels:    1024 x 1024
  • Pixel Size:    13 μm
  • Full Well Capacity:    100,000 e-
  • Sensor Diagonal:    18.8 mm
  • Video Size (inch):    1.2
  • Anti Blooming:    None
  • Color Options:    Monochrome
  • CCD Type:    Back Illuminated Frame Transfer
  • CCD Grades:    Grade 1

PL4720 MB or BB Performance

  • Digitization Speed:    500 kHz and 2 MHz
  • Typical System Noise:    10 e- RMS @ 500 kHz and 13 e- at 2 MHz
  • Typical Maximum Cooling:    55ºC Below Ambient
  • Typical Dark Current:    <0.3 e-/pixel/sec @ -30ºC
  • Non linearity:    <1%
  • Lens Mounts:    Optional Nikon F-Mount or Canon EOS mount
  • Available Shutters:    Optional 65 mm

All ProLine Cameras

  • Housing Dimensions:    6.2 x 6.2 x 3.8 (157.48 x 157.48 x 96.52)
  • Focal Plane to Faceplate:    21 mm (optical)
  • Weight:    5.6 lbs. (Liquid Cooled - 4.6 lbs.)
  • Interface:    USB 2.0>
  • Temperature Stability:    0.1ºC
  • Remote Triggering:    Standard
  • Shutter MTBF:    
  • Power:    12V (100-240V AC to 12V DC power supply included). With TEC off: <1A. TEC at 100%: 4.4A. (Optional Electromechanical Shutter open: 4A pulse for 100msec. Shutter held open, add 0.22A.)
  • Environment:    -30ºC - 45ºC | 10% - 90% Relative Humidity


Shipping Size

  • Size
    0 in × 0 in × 0 in
  • Weight
    0 lb

Shipping Options

Shipping options and prices may vary depending on the total value of your order. Your final shipping price will be determined at checkout.

Options shown are based on your estimated location.

  • $88.00 USD - [S2] USPS Ground Shipping (7-21 days)

Shipping Size

  • Size
    0 in × 0 in × 0 in
  • Weight
    0 lb
×
×
  • Create New...

Important Information

This site uses cookies to offer your a better browsing experience. You can adjust your cookie settings. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies, our Privacy Policy, and our Terms of Use