Jump to content

Canada's top-tier Telescopes & Accessories

Focusers/Motors & Accessories

33 products

  1. $12.79 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Cigarette Lighter Adapter to DC 2.1mm

  2. $12.79 USD
    2 in stock
    Back Order / Waiting List

    Pegasus Astro: Cigarette Lighter Adapter to DC 2.5mm

  3. $16.61 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Cigarette Lighter Adapter to XT60

  4. $19.18 USD
    Back Order / Waiting List

    Pegasus Astro: Motor Cable for Meade Zero Image Shift Focuser 

     

  5. $217.37 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Pegasus Astro Dual Motor Focus Controller v3
    Focus fast, reliable and accurate your telescope using a stepper or DC motor and our controller.

    Version3: Same features, more powerful motor outputs,  in a very compact size!

    Hint: You can get the controller as a set with our Motor Focus Kit or Motor Focus Kit SCT

    Dual Motor Focus brings a decade of experience in astrophotography and telescope focusing concepts. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus Dual Motor Focus Controller (DMFC) has been developed to meet these requirements.

    Dual mode
    The Dual Motor Focus Controller supports two kind of motor types.

    High Resolution Stepper motors (unipolar and bipolar) for absolute position focusing.
    DC motors by its Pulse Width Modulation duty cycle control.
    Controller can switch motor mode from its software, Mode can be instantly changed (with one mouse click) from ‘stepper’ to ‘dc’ motor and saved in controller’s EEPROM memory.

    Manual and PC operation.
    The controller can be operated by PC using its USB2 connectivity. A manual operation by utilising the digital encoder on the side of the controller simulates the knob of your real focuser. Turn the knob as it is the knob of your telescope’s focuser. If you press it, speed of the motor will be reduced to 1:10.

    Dual Colour Indicator
    A dual colour light emitted diode (Green / Yellow) is fitted on the side of the unit. Each colour indicates speed and the led can be turned on or off by its software during an observing session. Keep it pressed to disable the knob.

    Robofocus compatible connector pin out
    Motor output is fully compatible with “Robofocus ©” pin out. Output can drive most of the motors in the market. Take a look in our F.A.Q tab.

    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one (1) meter length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe always included in package)

    Backlash Compensation
    Controller can compensate the backlash you might encounter in your system. Although our motor has very low backlash other setups might need this feature. Backlash compensation is supported from a function inside controller’s firmware.

    ASCOM compliant
    The controller is fully compatible with latest ASCOM 6 and can easily be controlled from a computer.

    INDI (Open Astronomy Instrumentation) compliant
    Pegasus DMFC driver is included with libindi >= 1.5.1

    Standalone program support
    The controller can be operated by the standalone DMFC software. (Only available for Windows OS)

    Firmware upgrade support
    Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    Two Years warranty
    Warranty covers the controller device including the temperature sensor.

    In the box: 
    Dual Motor Focus Controller    ✔
    Temperature Sensor    ✔
    USB type B Cable (1.8m)    ✔
    Cigarette Lighter Adapter    ✔
    Stepper Motor Cable    ✔

  6. $104.85 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: 

    EZY Focus Hand Controller for UPBv2 and Prodigy
    The EZY Focus Hand Controller is a perfect match for your Ultimate Powerbox v2 or Prodigy Microfocuser. This little device allows precision control of your motorized focuser. It also ensures a vibration free focus routine!

    Digital Encoder with a Push button
    The rotary knob simulates the knob of your focuser. Rotate the digital knob and easily focus! Precision can be achieved when you press the knob inside. Speed is reduced to 1:10 just like the fine focus knob of your focuser! Click it again to switch to coarse focus.

    Pushbuttons to Focus IN and OUT
    Two additional buttons “<< and >>” allows you to move the focuser IN or OUT by the exact and preconfigured step count you have set in the EZY Focus menu. Every time you press the button an audible beep confirms the motor movement.

    Can work simultaneously with PC motor operation
    Just plug the hand controller in the EXT port of the Ultimate Powerbox v2 or Prodigy Microfocuser and enjoy precision in manual focusing without vibrations. No need to remove the hand controller when you use your PC to control the motor. Both can work in parallel and sync motor position in screen.

    Organic LED display with Red Film
    A 1.3 inch 128 x 64 pixel Organic LED (red film) screen is used for the device. It will ensure that your night vision will be unaffected.
    Large fonts, Legible letters displaying motor position, motor position presets and settings menu
    Temperature and Humidity Sensor.
    EZY Focus has an embedded high accuracy temperature and relative humidity sensor. The Ultimate Powerbox v2 automatically uses this sensor discarding the stock UPBv2 sensor.

    EZY Focus and sensor is discovered in the Ultimate Powerbox v2 software and displays readings just like your stock sensor.
    Bright adjustable red LED light
    A large red colored LED is placed in the front of the device, allowing you to use the “EZY Focus Hand Controller” as an astronomical map red light. LED’s brightness can be configured from the device menu.
    Compact size
    Dimensions: 113mm x 46mm x 25mm , Weight 90 grams

    In the box
        EZY Focus Hand Controller (with detachable lanyard)
        RJ12 to RJ12 cable (1.5m cable length)
    Compatible with
    Ultimate Powerbox v2
    Prodigy Microfocuser

  7. $76.72 USD
    Back Order / Waiting List

    Pegasus Astro: 

    Hand Controller of the FocusCube allows manual focus with precision and without vibrations!

    This Hand Controller is suitable only for the Pegasus FocusCube. Do not plug it in any other Pegasus Astro product as you may damage both devices.
    Digital Encoder with a Push button
    The rotary knob simulates the knob of your focuser. Rotate the digital knob and easily focus! Precision can be achieved if you press the knob inside. Speed is reduced to 1:10 just like the fine focus knob of your focuser!

    Can work simultaneously with the PC operation
    Just plug the hand controller in the auxiliary port of the FocusCube and enjoy precision in manual focusing without vibrations. No need to remove the hand controller when you use your PC to control the FocusCube. Both can work in parallel.

    A LED indicator for each speed
    On top of the RJ45 socket there are two LEDs. Green and Yellow indicate current speed: coarse or fine focus.

    IN THE BOX

    1 x Hand Controller for FocusCube
    1 x RJ45 to RJ45 Cable

  8. $313.27 USD
    Back Order / Waiting List

    Pegasus Astro: FocusCube 2
    Focus fast, reliable and accurate your telescope by using the “FocusCube 2″. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus FocusCube has been developed to meet all of these requirements.

    Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box. Do not be fooled by its size! This device can easily lift more than 6kg (212 ounces) of imaging equipment when the telescope points to the zenith!

    This stepper motor is a high resolution geared stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120). Its gearbox has very low backlash and high torque suitable to focus in micron scale! You only need this device to focus! Attach the FocusCube to your refractor / reflector / SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!

    IMPORTANT NOTE
    FocusCube is a standalone device and includes controller functionality. 
    No physical hand controller is included or required.
    DO NOT pair it with the Dual Motor Focus Controller or any other controller in the market.
    DO NOT connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output
    The RJ45 port at the back is only for the hand controller or the included temperature sensor.

    High torque & resolution stepper motor
    Embedded unipolar stepper motor has a powerful and very low backlash gearbox. Motor Step Angle is 7.5 deg but the 1:120 reduction gearbox turns the reduction rate to 0.06255 deg / step. As firmware implements half step drive, the motor can execute twice the steps per cycle. This means 11510 steps per cycle! Bottom line: You can focus in microns, easily and with great accuracy.

    Motor can lift up to 6Kg of equipment (212 ounces) of imaging equipment when the telescope points to the zenith!

    Two bracket versions
    You can choose between:

    Universal bracket: which fits to most focusers in the market
    SCT Bracket: SCT Bracket fits to Celestron C Series, Celestron Edge and Celestron RASA telescopes.

    Please notice
    We provide two SCT versions. The only difference is in the metal pulley bore diameter in the package. (13mm vs 22mm).

    Celestron Classic/ Edge / Rasa 6, 8, 9.25”-> 13mm
    Celestron Classic/ Edge / Rasa 11”, 14” -> 22mm

    Make sure you selected the correct type!

    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is always included)

    Expansion Port / Manual Focus (optional accessory)
    FocusCube includes an expansion RJ45 port on the left side.  This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.

    ASCOM supported
    The controller is fully compatible with latest ASCOM 6.4


    INDI (Open Astronomy Instrumentation) supported
    Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.

    Standalone program supported
    The controller can be operated by the standalone software. 
    (Only available for Windows)

    All cables are included
    A 1.8m USB Type B cable is included in the package.
    A 1.5m Cigarette lighter adapter power cable is included in the package
    Six solid motor couplers are included
    Six solid, different bore size, motor couplers are provided so you can select the coupler that fits to your focuser’s shaft. Choose between 3mm to 8mm couplers. All of them are included in the package.

    All cables are included
    A 1.8m USB Type B cable is included in the package.
    A Cigarette lighter cable is included in the package
    Firmware upgrade support
    Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    2 Years warranty
    For the FocusCube device and the temperature sensor.

    Compact size
    56 x 63 x 39 mm / Weight 300g

  9. $377.20 USD
    Back Order / Waiting List

    Pegasus Astro: FocusCube SCT has been replaced by the Focus Cube Zero. Zero allows backlash free movement and is way faster than older motor

    Focus fast, reliable and accurate your Celestron SCT telescope by using the “FocusCube Zero“. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus FocusCube Zero has been developed to meet all of these requirements.

    Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box.

    Stepper motor provides high speed, focus accuracy and zero backlash. You only need this device to focus! Attach the FocusCube Zero to your SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!
    IMPORTANT NOTE
    FocusCube is a standalone device and includes controller functionality. 
    No physical hand controller is included or required.
    DO NOT pair it with the Dual Motor Focus Controller or any other controller in the market.
    DO NOT connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output
    The RJ45 port at the back is only for the hand controller or the included temperature sensor.
    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash movement. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Please notice that we provide three different SCT versions
    The difference is in the metal pulley bore diameter & the screw length in the package. Please make sure you have selected the correct type for your telescope.

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-FCZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-FCZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-FCZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-FCZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit) (SKU:PEG-FCZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-FCZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.
    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is included in package)
    Expansion Port / Manual Focus (optional accessory)
    FocusCube includes an expansion RJ45 port at the back of the enclosure.  This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.
    ASCOM supported
    The controller is fully compatible with latest ASCOM 6.5

    INDI (Open Astronomy Instrumentation) supported
    Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.
    Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html

    Standalone program supported
    The controller can be operated by our standalone software.
    (Only available for Windows)

    All required cables are included
    A 1.8m USB Type B cable
    A 1.5m Cigarette lighter adapter power cable
    Firmware upgrade support
    Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    Compact size
    52 x 58 x 35 mm / Weight 280g

  10. $377.20 USD
    Back Order / Waiting List

    Pegasus Astro: FocusCube SCT has been replaced by the Focus Cube Zero. Zero allows backlash free movement and is way faster than older motor

    Focus fast, reliable and accurate your Celestron SCT telescope by using the “FocusCube Zero“. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus FocusCube Zero has been developed to meet all of these requirements.

    Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box.

    Stepper motor provides high speed, focus accuracy and zero backlash. You only need this device to focus! Attach the FocusCube Zero to your SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!
    IMPORTANT NOTE
    FocusCube is a standalone device and includes controller functionality. 
    No physical hand controller is included or required.
    DO NOT pair it with the Dual Motor Focus Controller or any other controller in the market.
    DO NOT connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output
    The RJ45 port at the back is only for the hand controller or the included temperature sensor.
    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash movement. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Please notice that we provide three different SCT versions
    The difference is in the metal pulley bore diameter & the screw length in the package. Please make sure you have selected the correct type for your telescope.

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-FCZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-FCZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-FCZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-FCZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit) (SKU:PEG-FCZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-FCZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.
    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is included in package)
    Expansion Port / Manual Focus (optional accessory)
    FocusCube includes an expansion RJ45 port at the back of the enclosure.  This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.
    ASCOM supported
    The controller is fully compatible with latest ASCOM 6.5

    INDI (Open Astronomy Instrumentation) supported
    Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.
    Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html

    Standalone program supported
    The controller can be operated by our standalone software.
    (Only available for Windows)

    All required cables are included
    A 1.8m USB Type B cable
    A 1.5m Cigarette lighter adapter power cable
    Firmware upgrade support
    Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    Compact size
    52 x 58 x 35 mm / Weight 280g

  11. $377.20 USD
    Back Order / Waiting List

    Pegasus Astro: FocusCube SCT has been replaced by the Focus Cube Zero. Zero allows backlash free movement and is way faster than older motor

    Focus fast, reliable and accurate your Celestron SCT telescope by using the “FocusCube Zero“. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus FocusCube Zero has been developed to meet all of these requirements.

    Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box.

    Stepper motor provides high speed, focus accuracy and zero backlash. You only need this device to focus! Attach the FocusCube Zero to your SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!
    IMPORTANT NOTE
    FocusCube is a standalone device and includes controller functionality. 
    No physical hand controller is included or required.
    DO NOT pair it with the Dual Motor Focus Controller or any other controller in the market.
    DO NOT connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output
    The RJ45 port at the back is only for the hand controller or the included temperature sensor.
    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash movement. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Please notice that we provide three different SCT versions
    The difference is in the metal pulley bore diameter & the screw length in the package. Please make sure you have selected the correct type for your telescope.

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-FCZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-FCZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-FCZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-FCZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit) (SKU:PEG-FCZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-FCZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.
    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is included in package)
    Expansion Port / Manual Focus (optional accessory)
    FocusCube includes an expansion RJ45 port at the back of the enclosure.  This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.
    ASCOM supported
    The controller is fully compatible with latest ASCOM 6.5

    INDI (Open Astronomy Instrumentation) supported
    Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.
    Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html

    Standalone program supported
    The controller can be operated by our standalone software.
    (Only available for Windows)

    All required cables are included
    A 1.8m USB Type B cable
    A 1.5m Cigarette lighter adapter power cable
    Firmware upgrade support
    Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    Compact size
    52 x 58 x 35 mm / Weight 280g

  12. $30.68 USD
    Back Order / Waiting List

    Pegasus Astro: Pulley and Timing Best for Motor Focus Kit (Lens Kit)

  13. $153.44 USD
    Back Order / Waiting List

    Pegasus Astro: 

    Motor Focus Kit v2 (Universal)

    Focus accurate and fast your telescope using our powerful Motor Focus Kit v2. This high resolution geared box has a 0,06 degree step size can can easily lift more than 6 Kg (per cm). Its high torque is suitable for lifting heavy imaging equipment. Moreover motor’s gearbox has a low backlash which can easily tuned using backlash compensation in imaging software. The RJ45 socket can be converted to compatible Robofocus Pinout.
    Note: You will also need a stepper controller to drUniversal L Shaped Bracket (Black Anodisation)

    A L shaped black anodised aluminium bracket, hard to bend, has cut rails and can be attached to a wide range of focusers. In fact we have successfully installed it on:

    Orion Optics UK default focuser
    GSO (RC focuser)
    Takahashi (FSQ106, FSQ85)
    Moonlite (2”, 2.5”)
    Baader (Steel track)
    Synta Focuser Refractors
    Altair Astro (2”, 2.5”, 3”)
    Starlight Focusers (2”, 2.5”, 3”, 3.5”)ive the motor. Check our Dual Motor Focus Controller

    What the Motor Focus Kit package includes:
    High Resolution Stepper Geared Motor Enclosure (Step Angle 7.5, Deg 120, Gear Ration 1:120). Its gearbox has very low backlash and high torque suitable to focus in micron scale.
    Universal Black Anodised Aluminium L shaped bracket for Motor
    6 x Solid Motor Couplers (3mm to 8mm)
    Different sizes of bolts and spacers

  14. $198.19 USD
    Back Order / Waiting List

    Pegasus Astro: Motor Focus Kit SCT has been replaced by the Motor Focus Kit Zero. Zero allows backlash free movement and is way faster than older motor

    Focus accurate and fast your Celestron SCT telescope using our powerful Motor Focus Kit Zero. This fast and zero backlash stepper motor has the required torque to focus of your SCT telescope with great precision.

    Pulley and Belt design allows the motor to stay away from your filter wheel (and not collide with it) when you use a focal reducer. Its sophisticated SCT bracket design (margarita style) can fit to all new Celestron SCTs (Classic / Edge) and RASA series.
    Please note that you will also need a motor controller to drive this motor.

    Products that can drive the Motor Focus Kit Zero are:
    Dual Motor Focus Controller
    Ultimate Powerbox v2 only (v1 is not compatible)
    eXternal Motor Controller

    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash drive. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-MFKZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-MFKZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-MFKZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-MFKZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit & a Metal Flange: SKU: PEG-FLNG-SCT11) (SKU:PEG-MFKZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-MFKZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.

    In the box
    Motor Focus Kit Zero
    Black Aluminium Anodised Margarita Bracket for Celestron SCT Telescopes
    Timing Belt
    13 mm bore size of Pulley GT2 (6”,8”,9.25”) or 22mm bore size of Pulley GT2 (11” ,14” Celestron)
    Four M3x6mm length screws (to attach the enclosure on the bracket)
    3 x screws and 3 x plastic washers

  15. $198.19 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Motor Focus Kit SCT has been replaced by the Motor Focus Kit Zero. Zero allows backlash free movement and is way faster than older motor

    Focus accurate and fast your Celestron SCT telescope using our powerful Motor Focus Kit Zero. This fast and zero backlash stepper motor has the required torque to focus of your SCT telescope with great precision.

    Pulley and Belt design allows the motor to stay away from your filter wheel (and not collide with it) when you use a focal reducer. Its sophisticated SCT bracket design (margarita style) can fit to all new Celestron SCTs (Classic / Edge) and RASA series.
    Please note that you will also need a motor controller to drive this motor.

    Products that can drive the Motor Focus Kit Zero are:
    Dual Motor Focus Controller
    Ultimate Powerbox v2 only (v1 is not compatible)
    eXternal Motor Controller

    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash drive. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-MFKZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-MFKZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-MFKZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-MFKZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit & a Metal Flange: SKU: PEG-FLNG-SCT11) (SKU:PEG-MFKZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-MFKZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.

    In the box
    Motor Focus Kit Zero
    Black Aluminium Anodised Margarita Bracket for Celestron SCT Telescopes
    Timing Belt
    13 mm bore size of Pulley GT2 (6”,8”,9.25”) or 22mm bore size of Pulley GT2 (11” ,14” Celestron)
    Four M3x6mm length screws (to attach the enclosure on the bracket)
    3 x screws and 3 x plastic washers

  16. $198.19 USD
    Back Order / Waiting List

    Pegasus Astro: Motor Focus Kit SCT has been replaced by the Motor Focus Kit Zero. Zero allows backlash free movement and is way faster than older motor

    Focus accurate and fast your Celestron SCT telescope using our powerful Motor Focus Kit Zero. This fast and zero backlash stepper motor has the required torque to focus of your SCT telescope with great precision.

    Pulley and Belt design allows the motor to stay away from your filter wheel (and not collide with it) when you use a focal reducer. Its sophisticated SCT bracket design (margarita style) can fit to all new Celestron SCTs (Classic / Edge) and RASA series.
    Please note that you will also need a motor controller to drive this motor.

    Products that can drive the Motor Focus Kit Zero are:
    Dual Motor Focus Controller
    Ultimate Powerbox v2 only (v1 is not compatible)
    eXternal Motor Controller

    Zero backlash stepper motor
    Embedded bipolar stepper motor provides a zero backlash drive. Motor is very fast and allows you to quickly move from any focus point to another.

    SCT Bracket
    A special shaped black anodised aluminium bracket, hard to bend, can be attached to most of the Celestron SCT telescopes. We have successfully installed it on:

    Celestron Classic & EdgeHD 6, 8, 9.25 (SKU:PEG-MFKZERO-SCT68925)
    Celestron Classic & Edge HD 11 (SKU:PEG-MFKZERO-SCT11)
    Celestron Classic & Edge HD 14 (SKU:PEG-MFKZERO-SCT14)
    Celestron RASA 8 (SKU: PEG-MFKZERO-SCT68925)
    Cellestron RASA 11 (V2 – For V1 you will need Celestron Retrofit Kit & a Metal Flange: SKU: PEG-FLNG-SCT11) (SKU:PEG-MFKZERO-SCT11)
    Celestron RASA 14” (SKU:PEG-MFKZERO-SCT14)

    Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.

    In the box
    Motor Focus Kit Zero
    Black Aluminium Anodised Margarita Bracket for Celestron SCT Telescopes
    Timing Belt
    13 mm bore size of Pulley GT2 (6”,8”,9.25”) or 22mm bore size of Pulley GT2 (11” ,14” Celestron)
    Four M3x6mm length screws (to attach the enclosure on the bracket)
    3 x screws and 3 x plastic washers

  17. $12.79 USD
    Back Order / Waiting List

    Pegasus Astro: Motor Coupler Set 3mm-8mm (6 PCS)

    Six different motor couplers (bore diameter from 3mm to 8mm)

     

  18. $83.11 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: 

    Available Adapters for telescopes
    Optional adapters for telescope connection are:

    Celestron SCT Edge C11, C14 (SKU: PEG-PRDG-C11)
    – Can be used to Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope.

  19. $217.37 USD
    Back Order / Waiting List

    Pegasus Astro:: Skywatcher Esprit 100

    Adapter consists of two parts. The spacer part can be used for optimal backfocus distance.

  20. $1,054.69 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Prodigy is our new 3” robotic microfocuser. It includes the electronics and an accurate motor allowing you to precisely focus your telescope.

    Its sturdy mechanical design ensures that Prodigy Microfocuser can lift up to 10Kg of equipment, dead accurate and flexure free. Focuser has a 25mm of draw tube travel and a clear aperture of 76mm / 3”.

    Prodigy includes 2xUSB2 switchable ports and 2x12V switchable power outputs that provide electric “juice” to your equipment close to the focuser (e.g Filter Wheel, Guiding camera etc).

    Estimated Launch: 2nd Quarter of 2021Clear aperture of 3 inches
    Prodigy Microfocuser has a clear aperture of 3 inches or 76mm. Its drawtube can travel up to 25mm

    Adjustable rotation
    Focuser allows adjustable rotation / precise orientation on both sides. This helps you to easily fit the microfocuser to your telescope and also place your camera with the desired orientation.

    Innovative design supporting highweight loads
    Prodigy Microfocuser is not a Crayford neither a Rack & Pinion type. Its innovative mechanical focus design provides very high load support and accuracy with zero maintenance. Prodigy Microfocuser can easily lift up to 10Kg (22lb) of imaging equipment with zero flex

    Zero Motor Backlash
    Embedded stepper motor design ensures a smooth, low noise and backlash free operation. V-Curve points during automatic focus procedure are dead accurate.

    Available Adapters for telescopes
    Optional adapters for telescope connection are:

    Celestron SCT Edge C11, C14 (SKU: PEG-PRDG-C11)
    – Can be used to Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted first on the telescope.

    GSO RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)
    Industrial grade USB Hub and Power Ports
    At the side of the focuser you can locate:

    2 x USB2 ports
    allowing the connectivity of equipment close to your focuser such as a Filter Wheel, a guiding camera, a motorized OAG etc.
    2 x 12V power outputs
    Each port can output up to 4AmpsA neat feature to tide up your USB and Power cables.
    Each of these ports, USB or Power, can be switched ON/ OFF via the supplied software.

    Temperature Probe
    An external digital temperature sensor input is located on the side of the focuser. A digital temperature sensor is included in the package. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver.

    This image has an empty alt attribute; its file name is sensor_dmfc-1024x424.png
    Expansion Port / Manual Focus (optional accessory)
    Prodigy has an expansion RJ45 port on the side of the enclosure.  This port allows the connectivity of our “upcoming” hand controller for this product.
    Standalone program available
    Prodigy Microfocuser can be operaFirmware upgrade support
    Firmware supports re-programming via the USB 2.0 connection using upgrade software ((only available for Windows), for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    In the box
    Prodigy Microfocuser    ✔
    M54 Male to M54 Male Adapter    ✔
    M54 Male to M48 Male Adapter    ✔
    Temperature Sensor (0.6m)    ✔
    USB type B Cable (1.8m)    ✔
    Cigarette Lighter Adapter (10A fused)    ✔
    2 x USB2 (angled) (0.5m length)    ✔
    2 x 2.1mm Power cord (0.5m length)ted by our standalone software.
    (Only available for Windows OS).
     

  21. $95.90 USD
    Back Order / Waiting List

    Pegasus Astro: Available Adapters for telescopes
    Optional adapters for telescope connection are: GSO RC 10”, 12” , 14”, 16” (SKU: PEG-PRDG-GSO117)

  22. $83.11 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: 

    Prodigy Microfocuser Telescope Adapter for GSO RC 8''
    Prodigy Microfocuser
    Prodigy Microfocuser is a robust clear 3-inch robotic focuser which allows you to precisely and remotely control the focus of your telescope setup.

    Its sturdy mechanical design ensures that Prodigy Microfocuser can lift up to 10Kg of equipment, dead accurate and flexure free. Focuser has a 25mm of draw tube travel and a clear aperture of 76mm / 3”.

    The full 3-inch focuser drawtube accepts different types of telescope adapters such as Celestron SCT Edge, GSO RC types and refractor types.

    Prodigy houses 2xUSB2 switchable ports and 2x12V switchable power outputs that provide electric “juice” to your equipment close to the focuser (e.g Filter Wheel, Guiding camera etc).
    Clear aperture of 3 inches
    Prodigy Microfocuser has a clear aperture of 3 inches or 76mm. Its drawtube can travel up to 25mm

    Adjustable rotation
    Focuser allows adjustable rotation / precise orientation on both sides. This helps you to easily fit the microfocuser to your telescope and also place your camera with the desired orientation.
    Innovative design supporting highweight loads
    Prodigy Microfocuser is not a Crayford neither a Rack & Pinion type. Its innovative mechanical focus design provides very high load support and accuracy with zero maintenance. Prodigy Microfocuser can easily lift up to 10Kg (22lb) of imaging equipment with zero flex

    Zero Motor Backlash
    Embedded stepper motor design ensures a smooth, low noise and backlash free operation. V-Curve points during automatic focus procedure are dead accurate.

    Available Adapters for telescopes
    Prodigy Microfocuser can accept different types of telescope adapters. The adapter can be securely mounted and aligned on user’s preference.
    Industrial grade USB Hub and Power Ports
    At the side of the focuser you can locate:

    2 x switchable USB2 ports
    allowing the connectivity of equipment close to your focuser such as a Filter Wheel, a guiding camera, a motorized OAG etc.
    2 x 12V switchable Power outputs
    Each output (2.1mm) can output up to 4Amps


    A neat feature to tide up your USB and Power cables.
    Each of these ports, USB or Power, can be switched ON/ OFF via the supplied software.

    Temperature Probe
    An external digital temperature sensor input is located on the side of the focuser. A digital temperature sensor is included in the package. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver.
    Expansion Port / Manual Focus (optional accessory)
    Prodigy has an expansion RJ45 port on the side of the enclosure.  This port allows the connectivity of our “upcoming” hand controller for this product.
    Standalone program available
    Prodigy Microfocuser can be operated by our standalone software.
    (Only available for Windows OS).
    Firmware upgrade support
    Firmware supports re-programming via the USB 2.0 connection using upgrade software ((only available for Windows), for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

    Weight
    Prodigy Microfocuser weights 1.5Kg / 3.3lbs

  23. $76.72 USD
    Back Order / Waiting List

    Pegasus Astro:: Prodigy Microfocuser Telescope
    M68 Female Adapter

  24. $108.69 USD
    Back Order / Waiting List

    Pegasus Astro:: Prodigy Microfocuser Telescope
    Adapter for Newtonian 10-inch

  25. $108.69 USD
    Back Order / Waiting List

    Pegasus Astro:: Prodigy Microfocuser Telescope
    Adapter for Newtonian 12-inch

  26. $89.51 USD
    Back Order / Waiting List

    Pegasus Astro:: Prodigy Microfocuser Telescope
    Adapter for SCT 2'' 
    SCT 2-inch
    Can be used with SCT 2”telescopes (for 2” male thread telescopes such as Meade and Celestron SCTs)

  27. $92.06 USD
    Back Order / Waiting List

    Pegasus Astro: SCT Bracket, Pulleys, Belt,
    Bolts Kit for Celestron 11 

  28. $92.06 USD
    Back Order / Waiting List

    Pegasus Astro: SCT Bracket, Pulleys, Belt,
    Bolts Kit for Celestron 14

  29. $92.06 USD
    Back Order / Waiting List

    Pegasus Astro: SCT Bracket, Pulleys, Belt,
    Bolts Kit for Celestron  6,8,9.25

  30. $12.79 USD
    Back Order / Waiting List

    Pegasus Astro: Temperature sensor for DMFC (Jack 3.5mm)

    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one (1) meter length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe always included in package)

     

  31. $12.79 USD
    Back Order / Waiting List

    Pegasus Astro: Temperature sensor for FocusCube (RJ45)

    Temperature Probe
    An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is always included)

  32. $44.75 USD
    1 in stock
    Back Order / Waiting List

    Pegasus Astro: Universal L Shaped Bracket (Black Anodisation) PLUS Six different motor couplers (bore diameter from 3mm to 8mm)

    A L shaped black anodised aluminium bracket, hard to bend, has cut rails and can be attached to a wide range of focusers. In fact we have successfully installed it on:

    Orion Optics UK default focuser
    GSO (RC focuser)
    Takahashi (FSQ106, FSQ85)
    Moonlite (2”, 2.5”)
    Baader (Steel track)
    Synta Focuser Refractors
    Altair Astro (2”, 2.5”, 3”)
    Starlight Focusers (2”, 2.5”, 3”, 3.5”)

    Six different motor couplers (bore diameter from 3mm to 8mm)

  33. $31.97 USD
    Back Order / Waiting List

    Pegasus Astro: Universal L Shaped Bracket (Black Anodisation)

    A L shaped black anodised aluminium bracket, hard to bend, has cut rails and can be attached to a wide range of focusers. In fact we have successfully installed it on:

    Orion Optics UK default focuser
    GSO (RC focuser)
    Takahashi (FSQ106, FSQ85)
    Moonlite (2”, 2.5”)
    Baader (Steel track)
    Synta Focuser Refractors
    Altair Astro (2”, 2.5”, 3”)
    Starlight Focusers (2”, 2.5”, 3”, 3.5”)
     

     

×
×
  • Create New...

Important Information

This site uses cookies to offer your a better browsing experience. You can adjust your cookie settings. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies, our Privacy Policy, and our Terms of Use