Miscellaneous
We are Canada's first and only ADM Accessories Tier-1 Prime Dealer. We carry over $20,000 in ADM Accessories inventory at all times.
69 products
-
Mount Adapter for Celestron AVX mount [ADM-AVX-A]
$71.07 USDADM Accessories: AVX-A- Mount Adapter for Celestron AVX mount
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Celestron AVX Azimuth Adjustment Knobs [ADM-AVX-AZ]
$40.17 USDADM Accessories: Large rosette style azimuth adjusting knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round, 1.5″ long. M8-1.25 x 2.5″.
-
Celestron AVX Polar Scope Plug [ADM-AVX-PL]
$14.42 USDADM Accessories: Replacement aluminum plug for polar scope bore. Rubber “O” ring for a precision fit. 1.7″ diameter.
-
Celestron AVX Saddle Tightening Knobs [ADM-AVX-SAD]
$40.17 USDADM Accessories: ADM offers a set of 2 clamping knobs to facilitate the placement of your optical tube on your Celestron Advanced VX mount. These screws are longer than those of the original buttons and the clamping is facilitated by the star head which ensures better grip.
A set of 3 buttons is also available to change the tripod clamping screws.
All metal construction. Anodized orange. -
Celestron AVX Spreader Bar Knobs [ADM-AVX-SB]
$40.17 USDADM Accessories: Large rosette spreader bar knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round. 1x M12 x 1.5 threaded knob and 1x 12mm square knob.
-
Celestron AVX Tripod Knob Set [ADM-AVX-TKS]
$60.77 USDADM Accessories: ADM offers a set of 2 clamping knobs to facilitate the placement of your optical tube on your Celestron Advanced VX mount. These screws are longer than those of the original buttons and the clamping is facilitated by the star head which ensures better grip.
A set of 3 buttons is also available to change the tripod clamping screws.
All metal construction. Anodized orange. -
Mount Adapter for SkyWatcher AZEQ5/ Orion Atlas AZEQ-G Mounts [ADM-AZEQ5-A]
$40.17 USDADM Accessories: AZEQ5-A- Mount Adapter for SkyWatcher AZEQ5/ Orion Atlas AZEQ-G Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for iOptron AZ Pro Mounts [ADM-AZPRO-A]
$40.17 USDADM Accessories: AZPRO-A- Mount Adapter for iOptron AZ Pro Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for Celestron CG5 mounts and many of the CG5 clone mounts [ADM-CG5-A]
$71.07 USDADM Accessories: CG5-A- Mount Adapter for Celestron CG5 mounts and many of the CG5 clone mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Side by Side Adapter for Celestron CGE and CGX Mounts. Side by Side Adapter for Celestron CGE and CGX Mounts [ADM-CGE-SBS]
$194.67 USDADM Accessories: Allows users of the CGE and CGX to use a SBS System by allowing this adapter to to "trick" the mount into thinking it is pointed in the original orientation.
-
Celestron CGEM Alitude Adjustment Knob [ADM-CGEM-ALT]
$45.32 USDADM Accessories: Large altitude adjusting knobs. CNC machined from 6061 aluminum. Orange anodized. 2.5″ round, 3″ long. M18-2.5 x 120mm long.
-
Celestron CGEM Azimuth Adjustment Knobs [ADM-CGEM-AZ]
$40.17 USDADM Accessories: Large rosette style azimuth adjusting knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round, 1.5″ long. M8-1.25 x 2.5″.
-
Celestron CGEM Tripod Knob Set For DX Version [ADM-CGEM-DX-TKS]
$60.77 USDADM Accessories: Large rosette tripod knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round, 1.5″ long. M10-1.5 x .8″ long.
-
Celestron CGEM Polar Scope Plug [ADM-CGEM-PL]
$14.42 USDADM Accessories: Replacement aluminum plug for polar scope bore. Rubber “O” ring for a precision fit. 1.7″ diameter.
-
Celestron CGEM Saddle Tightening Knobs [ADM-CGEM-SAD]
$40.17 USDADM Accessories: Large rosette replacement saddle knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round, 1.5″ long. M8-1.25 x 2.4″, Wt. 8oz
-
Celestron CGEM Spreader Bar Knobs [ADM-CGEM-SB]
$40.17 USDADM Accessories: Large rosette spreader bar knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round. 1x M12 x 1.5 threaded knob and 1x 12mm square knob.
-
Celestron CGEM “T” Knob [ADM-CGEM-T]
$19.57 USDADM Accessories: Large altitude locking knob. Identical in length to the original. CNC machined from 6061 aluminum. Orange anodized. 3.8″ overall length. M10-1.5 x 3″ long.
-
Celestron CGEM Tripod Knob Set [ADM-CGEM-TKS]
$60.77 USDADM Accessories: Large rosette tripod knobs. CNC machined from 6061 aluminum. Orange anodized. 2″ round, 1.5″ long. M10-1.5 x .8″ long.
-
20mm Counterweight Shaft Adapter. [ADM-CW20-A]
$40.17 USDADM Accessories: 20mm Counterweight Shaft Adapter. CW20-A is a counterweight shaft adapter. This adapter will fit any 20mm sized shaft. Three set 1/4×20 set screws secure it to the 20mm shaft. Two 1/4×20 bolts can be used to adjust the pointing of the saddle. Fits any of the -M8 saddles.
-
Delrin Tipped Thumb Screws- Large [ADM-DTTS-L]
$40.17 USD2 in stockBack Order / Waiting ListADM Accessories: DTTS-L Delrin Tipped Thumb Screws- Large
ADM screw for ADM shift rings. Thread 3/8 ''. Delivered to the unit
Reference Model DTTS-LLength of knurled part: 16mm
Length of the threaded part: 50mm
Insert length in Delrin black: 4mm
Diameter: 9.3mm -
Delrin Tipped Thumb Screws- Medium [ADM-DTTS-M]
$40.17 USDADM Accessories: DTTS-M Delrin Tipped Thumb Screws- Medium ADM screw for ADM shift rings. Thread 3/8 ''. Delivered to the unit.
Reference Model DTTS-M
Length of knurled part: 16mm
Length of the threaded part: 30mm
Insert length in Delrin black: 4mm
Diameter: 9.3mm -
Delrin Tipped Thumb Screws- Small [ADM-DTTS-S]
$40.17 USD1 in stockBack Order / Waiting ListADM Accessories: DTTS-S Delrin Tipped Thumb Screws- Small
-
Mount Adapter for SkyWatcher EQ6 as well as the Orion Atlas Mount with the standard profile [ADM-EQ6-A]
$40.17 USDADM Accessories: EQ6-A- Mount Adapter for SkyWatcher EQ6 as well as the Orion Atlas Mount with the standard profile
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for SkyWatcher EQ6N as well as the Orion Atlas Mount with the NEW profile [ADM-EQ6N-A]
$40.17 USDADM Accessories: EQ6N-A- Mount Adapter for SkyWatcher EQ6N as well as the Orion Atlas Mount with the NEW profile
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
A Mount Adapter for iOptron GEM28 and CEM40 [ADM-GEM28-A]
$40.17 USDADM Accessories: A Mount Adapter for iOptron GEM28 and CEM40
-
Mount Adapter for Vixen GPDX and GPDX2 Mounts. [ADM-GPDX-A]
$71.07 USDADM Accessories: GPDX-A Mount Adapter for Vixen GPDX and GPDX2 Mounts.
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for SkyWatcher HEQ5/ Orion Sirius Mounts [ADM-HEQ5-A]
$40.17 USD1 in stockBack Order / Waiting ListADM Accessories: HEQ5-A- Mount Adapter for SkyWatcher HEQ5/ Orion Sirius Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
532nm Green Laser with battery and charger. [ADM-LZR-532NM]
$40.17 USD2 in stockBack Order / Waiting ListADM Accessories: LZR-532– 532nm Green Laser with battery and charger. This laser has been tested under extreme cold conditions. It will operate at below freezing temperatures with a small decrease in energy output.
-
532nm Green Laser Pointer And Accessories [ADM-LZR-532NM-KIT]
$91.67 USDADM Accessories: LZR-532Kit– 532nm Green Laser with battery, charger, adjustable rings and universal mounting bracket. This laser has been tested under extreme cold conditions. It will operate at below freezing temperatures with a small decrease in energy output. Large Laser Holder. Designed for holding larger green lasers like the 532nm shown in the images on this page. Includes two 50mm three point adjustable rings. When properly aligned in the rings and additional set screw can be used to press the ON/OFF button of the laser. The laser holder includes a flat plate which includes a 1/4×20 tapped hole as well as a slot for a 1/4 button head screw. Can be mounted to many surfaces.
-
Large Laser Holder. 50mm Diameter [ADM-LZR-LG]
$50.47 USDADM Accessories: Large Laser Holder. Designed for holding larger green lasers like the 532nm shown in the images on this page. Includes two 50mm three point adjustable rings. When properly aligned in the rings and additional set screw can be used to press the ON/OFF button of the laser. The laser holder includes a flat plate which includes a 1/4×20 tapped hole as well as a slot for a 1/4 button head screw. Can be mounted to many surfaces.
The model designed to accommodate large green lasers (LZR-LG reference) is designed for powerful lasers with a larger body (as shown in the photo opposite) than conventional low power or medium power laser. It includes two 50mm rings with three metal adjustment screws. When properly aligned in the rings, the side screw provided for this purpose allows the laser to be switched on and off. The laser support is supplied with a flat plate with a 1/4 '' - 20 threaded hole and a slot for a 1/4 '' - 20 screw. Can be mounted on many surfaces. Delivered without laser.
-
Mount Adapter for Astro-Physics Mach 1 Mount [ADM-MACH1-A]
$40.17 USDADM Accessories: MACH1-A- Mount Adapter for Astro-Physics Mach 1 Mount
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for iOptron MiniTower Mounts [ADM-MT-A]
$40.17 USDADM Accessories: MT-A- Mount Adapter for iOptron MiniTower Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for iOptron MiniTower Pro Mounts [ADM-MTPRO-A]
$40.17 USDADM Accessories: MTPRO-A- Mount Adapter for iOptron MiniTower Pro Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Mount Adapter for Vixen Polaris Mounts [ADM-PL-A]
$40.17 USDADM Accessories: PL-A- Mount Adapter for Vixen Polaris Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Personal Solar Telescope Fine Focus Knob [ADM-PST-FF]
$29.87 USDADM Accessories; Personal Solar Telescope Fine Focus Knob
-
Radius Block Set for C11 [ADM-RB-C11]
$60.77 USDADM Accessories: Radius Block Set for C11
Fits all Celestron 1.75″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz.
-
Radius Block Set for C14 [ADM-RB-C14]
$60.77 USDADM Accessories: Radius Block Set for C14
Fits all Celestron 14″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz.
-
Radius Block Set for C8 [ADM-RB-C8]
$56.65 USDADM Accessories: Radius Block Set for C8
Fits all Celestron 8″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz.
-
Radius Block Set for C9.25 [ADM-RB-C925]
$60.77 USDADM Accessories: Radius Block Set Set for C9.25
Fits all Celestron 9.25″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz.
-
Radius Block Set for Meade 10 [ADM-RB-M10]
$81.37 USDADM Accessories: Radius Block Set Set for Meade 10
Fits all Meade 10″ OTA’s including LX and ACF. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .7″ long, 5.5″ wide, 1″ thick, Wt. as shown 6 oz.
-
Radius Block Set for Meade 12 [ADM-RB-M12]
$91.67 USDADM Accessories: Radius Block Set for Meade 12
Fits all Meade 12″ OTA’s including LX and ACF. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .7″ long, 7.5″ wide, 1″ thick, Wt. as shown 8 oz.
-
Radius Block Set for Meade 14 [ADM-RB-M14]
$101.97 USDADM Accessories: Radius Block Set for Meade 14
Fits all Meade 14″ OTA’s including LX and ACF. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .7″ long, 8.75″ wide, 1″ thick, Wt. as shown 8 oz.
-
Radius Block Set for Meade 8 [ADM-RB-M8]
$81.37 USDADM Accessories: Radius Block Set for Meade 8
Fits all Meade 8″ OTA’s including LX and ACF. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. .7″ long, 5.5″ wide, 1″ thick, Wt. as shown 6 oz.
-
Radius Block Set for RC6 [ADM-RB-RC6]
$60.77 USDADM Accessories: Radius Block Set for RC6
Fits Astro-Tech, Orion, GSO and TSO 6″ f/9 Ritchey-Chretien OTA’s. Mounting hardware included. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz
-
Radius Block Set for RC8 [ADM-RB-RC8]
$60.77 USDADM Accessories: Radius Block Set for RC8
Fits Astro-Tech, Orion, GSO and TSO 8″ f/9 Ritchey-Chretien OTA’s. Curved radius blocks and mounting hardware included. Uses existing mounting holes in OTA. .75″ long, 4″ wide, 1″ thick, Wt. 4 oz.
-
Small Radius Block Set for C11 [ADM-RB-SM-C11]
$40.17 USDADM Accessories: Small Radius Block Set for C11
Fits all Celestron 11″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. 1″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Small Radius Block Set for C14 [ADM-RB-SM-C14]
$40.17 USDADM Accessories: Small Radius Block Set for C14
Fits all Celestron 14″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. 1″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Small Radius Block Set for C8 [ADM-RB-SM-C8]
$36.05 USDADM Accessories: Small Radius Block Set for C8
Fits all Celestron 8″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. 1″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Small Radius Block Set for C9.25 [ADM-RB-SM-C925]
$40.17 USDADM Accessories: Small Radius Block Set for C9.25
Fits all Celestron 9.25″ OTA’s including CPC and HD models. Curved radius blocks and mounting hardware include. Uses existing mounting holes in OTA. 1″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Small Radius Block Set for RC6 [ADM-RB-SM-RC6]
$40.17 USDADM Accessories: Small Radius Block Set for RC6
Fits Astro-Tech, Orion, GSO and TSO 6″ f/9 Ritchey-Chretien OTA’s. Mounting hardware included. Uses existing mounting holes in OTA. 1.0″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Small Radius Block Set for RC8 [ADM-RB-SM-RC8]
$40.17 USDADM Accessories: Small Radius Block Set for RC8
Fits Astro-Tech, Orion, GSO and TSO 8″ f/9 Ritchey-Chretien OTA’s. Curved radius blocks and mounting hardware included. Uses existing mounting holes in OTA. 1″ long, 2.5″ wide, .325″ thick, Wt. 2 oz.
-
Rosette Knob Hand Tool [ADM-RKH-TOOL]
$35.02 USDADM Accessories: Rosette Knob Hand Tool
INCLUDED ITEMS:
-1x Hand Tool
-
Vixen Starbook 10 Tripod Holder [ADM-SB10]
$71.07 USDADM Accessories: 3D Printed Starbook 10 Holder for Vixen HAL130 Tripod. The holder clamps onto the tripod using a split clamp design similar to the ones used on all ADM Accessories saddles. The clamping system will not scratch, dent or mar the finish on the tripod. The holder allows user to press buttons while keeping the SB10 installed on the tripod leg. No more dangling it from the mount.
-
Mount Adapter used between the DUP7 and DSAD to rotate the saddle 90 degrees. [ADM-SBS-A]
$40.17 USDADM Accessories: Mount Adapter used between the DUP7 and DSAD to rotate the saddle 90 degrees.
SBS Adapter. 4″x4″x.75″. Used between a DUP7 and DSAD for turning the saddle 90 degrees. This allows mounts with internal limit switches to be used in Side-By-Side mode.
-
Slow Motion Control Knobs - Black [ADM-SMK-BK]
$35.02 USDADM Accessories: SMK-BK- Slow Motion Control Knobs for Alt/AZ Mounts. Black Anodized
These classic aluminum knobs replace the standard slow-motion knobs on Orion’s SkyView Pro mount. Available in either Black or Silver Anodized. 1-5/8″ in diameter and length, with a 5/8″ knurled grip and 1/4″ shaft.
-
Slow Motion Control Knobs - Clear [ADM-SMK-CL]
$35.02 USDADM Accessories: SMK-CL- Slow Motion Control Knobs for Alt/AZ Mounts. Clear Anodized
These classic aluminum knobs replace the standard slow-motion knobs on Orion’s SkyView Pro mount. Available in either Black or Silver Anodized. 1-5/8″ in diameter and length, with a 5/8″ knurled grip and 1/4″ shaft.
-
Mount Adapter for Vixen Super Polaris Mounts [ADM-SP-A]
$40.17 USDADM Accessories: SP-A- Mount Adapter for Vixen Super Polaris Mounts
-Compatible with all ADM Saddles
-CNC machined from 6061 aluminum
-Hardware not included -
Takahashi Finder Bracket [ADM-TAK-FB]
$60.77 USD2 in stockBack Order / Waiting ListADM Accessories: Designed specifically for Takahashi OTA’s and finderscopes. The quick release bracket fits between the finderscope and the OTA. The TAK-FB features a precise CNC machined dovetail, safety stop and thumb screw indents for precise repeatability. 1.25″ long, 1.6″ wide, .75″ high, Wt. 4 oz.
-
Takahashi Finder Bracket. Base Only [ADM-TAK-FB-B]
$35.02 USDADM Accessories: TAK-FB-B- Additional LOWER portion of the two piece dovetail assembly. The LOWER attaches directly to the OTA. 1.25″ long, 1.6″ wide, .5″ high, Wt. 4 oz.
-
Takahashi Finder Bracket. Upper Only [ADM-TAK-FB-U]
$35.02 USDADM Accessories: TAK-FB-U- Additional UPPER portion of the two piece dovetail assembly. The UPPER attaches directly to the finder. 1.25″ long, 1.6″ wide, .5″ high, Wt. 2 oz.