Jump to content

Canada's top-tier Telescopes & Accessories

Thepuckster

Members
  • Content Count

    13
  • Joined

  • Last visited

Everything posted by Thepuckster

  1. Many thanks for that. I think I'll reset what I did first and then set aside some time over the next few days to sort it out safely. Your help is very much appreciated.
  2. Thanks Rick. Your 2 cents could be worth considerably more! Further investigation needed I think. Thanks for the warning.
  3. Solved!! Thank you all. The problem was in my laptop and after digging around in the MS forums found the following solution - it's great to see images in the preview pane now! Press Windows + R Type in Regedit Go to : HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows>CurrentVersion>Policies>System Find the key EnableLUA and change 1 to 0 Press OK and restart computer Thanks again.
  4. It doesn't seem to be a BYEOS event. When I slide the image across the window of file explorer I get the normal ghost image but as soon as it crosses the window's boundary the ghost changes to the 'no entry' symbol which is why I suspect it didn't register in my log file since it wasn't recognised by BYEOS as an event. Thank you. All good points. The laptop was bought by me directly from Dell and has only been used for normal home use. I've checked the file names and directory paths and can't see anything amiss. Everything is stored in the computer apart from image files which ar
  5. I wonder if that's the root of my problem. None of my log files have that line - or anything like it- in them. Does this perhaps indicate what Rick mentioned and that the problem is in my computer. Normally BYEOS works fine in use and otherwise I have no trouble sliding any of my files into new locations
  6. Hi. It doesn't load. When I slide either a .jpg or .CR2 image across I get the circle with slash symbol. I've tried holding the key for a few seconds before release but still no image appears. No error message appears.
  7. Thank you Rick, this is what I'd suspected. I have only been using one PC - a Dell laptop which was upgraded to W10 from W8.1. I shall take your advice and investigate the workings of the PC. Otherwise BYEOS works fine but I'm just trying a dry-run in daylight using CDC and ASTAP for plate solving using some of my past images. Thank you for your help and advice.
  8. I'm running BYEOS 3.2.2-RC2 Premium. In fact I've never been able to use this feature with previous versions either.
  9. I'm running BackyardEOS on W10 with Canon 600D (3Ti). I have been unable to drag and drop .CR2 or .jpg files from my BYEOS folder in File Explorer to the preview pane with camera disconnected, or to the image pane with it connected. I've checked all the app permission folders in Security. When I try to drag and drop the files I get a circle with diagonal line even when waiting for several seconds. I'm obviously missing something and any help would be very welcome please.
  10. Thanks s3igell. That's the best explanation about USB hub usage I've seen. I have re routed cabling so that the guide camera and dslr now have their own dedicated sockets leaving anything else to go through the hub. On a trial daylight run (using the dog as the subject!),it appears to work just fine. Thanks again. Steve
  11. s3igell, thanks for the reassurance. At the moment I have everything connected to the laptop via a powered USB hub and I'm just wondering whether my cables or the routing of them may be slowing things down. I reckon I need to experiment a bit but would be interested to learn how others connect all the various devices to their computers when there 's not quite enough USB sockets. Steve
  12. Thanks Guylain . That's a great explanation and makes good sense. Steve
  13. Hi all I'm using Windows 7 64 bit with i3 processor and 4 GB RAM. I've just been using the planetary imaging section on the sun with my 18 Mp 600d. I've been capturing 2500 frames and the average size each file is approx. 5.2 GB. The first 6 movies were fine but after that nothing else was saved onto the hard drive although 2 files were shown in the processing window in BYEOS, (version 3.03 premium).There is loads of space on the hard drive. BYEOS appeared to have frozen, although I'm sure that was just the effect and not the cause. As a relative novice, have I jammed up my system?
×
×
  • Create New...

Important Information

This site uses cookies to offer your a better browsing experience. You can adjust your cookie settings. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies, our Privacy Policy, and our Terms of Use