[kNkMAIDResult_NotSupported] (kNkMAIDCommand_CapSet, 33042, kNkMAIDDataType_EnumPtr, 496758920)

[paulf]

Hi - beta was fine so I paid for the premium edition, downloaded 1.01 and it don't work when I try to take an image, the frame & focus is fine. I restarted camera, then the PC and still no joy so i am posting here! Will try the previous version now ...

 

21:07:55  Licensed to paulf

21:07:56  Nikon drivers initialized.

21:08:02  Attempting to connect camera...

21:08:03  D5300 CONNECTED!

21:08:07  Imaging session started.

21:08:08  Imaging session cancelled

21:08:08  [kNkMAIDResult_NotSupported] (kNkMAIDCommand_CapSet, 33042, kNkMAIDDataType_EnumPtr, 496758920)

21:08:09  Imaging session cancelled

21:08:37  Copy to clipboard

21:09:33  Camera SHUTDOWN!

21:09:41  Attempting to connect camera...

21:09:42  D5300 CONNECTED!

21:10:25  Imaging session started.

21:10:26  Imaging session cancelled

21:10:26  [kNkMAIDResult_NotSupported] (kNkMAIDCommand_CapSet, 33042, kNkMAIDDataType_EnumPtr, 496758920)

21:10:26  Imaging session cancelled

[paulf]

Got this working - ended up resetting the camera to its default settings and BYN worked fine thereafter .... !

[admin]

Nothing changed in sending the nikon commands form the beta versus production release, so something is not setup correctly for sure

 

I have several users using a D5300 with 1.0.1.

 

Send me the full log file at support@otelescope.com, the tiny except form the console is not helping at all.

 

The full log files are in "My Pictures\BackyardTEMP\logs".

 

Regards,

[paulf]

OK - now I got 1.0 with the same error ???

[paulf]

Nothing changed in sending the nikon commands form the beta versus production release, so something is not setup correctly for sure

 

I have several users using a D5300 with 1.0.1.

 

Send me the full log file at support@otelescope.com, the tiny except form the console is not helping at all.

 

The full log files are in "My Pictures\BackyardTEMP\logs".

 

Regards,

 

Done ... thanks

[admin]

If you ever find out which setting cause the issue I'd like to know, maybe I can find a work around in code if I know which setting caused the issue.

 

Thanks for reporting back.