Bulb mode is not automatically working

[daravuthseng]

I just bought Backyard Nikon premium edition 2.0.9. I can't make Bulb mode to capture pictures automatically at the setup exposures.

I have to enter each exposure manually. Your support is appreciated.

Quote

 

 

[astroman133]

What camera model? If the camera has a Bulb position on the rotary shooting mode dial, then I believe that it must be in the B position to shoot Bulb exposures with BYN. Also, which BYN screen are you trying to use, Imaging or Frame & Focus?

 

[admin]

We need to know which camera model you have.  Without this we can't help

[daravuthseng]

Thanks for your prompt responses. I have Nikon D810 and Wondow7 on my computer.

At Imaging, the bulb shutter keeps aborting after first image downloading.

Also, when I ran slow shutter speed at specific exposures, the captures keeps going non-stop until aborting.

I have no problem at all with trial version.

[admin]

IS the camera dial set to BULB.

This is no difference between trial and purchase software, it's the same application.

[daravuthseng]

Thanks for your support. I will dial my shutter speed to Bulb and try again.

After setting camera to bulb, I am still not able to complete a full cycle exposures as wanted.

I think it might relate to my camera due to its Non-US version. I guess.

Anyway, I think I can manually press enter after each exposure.

[daravuthseng]

Thanks for your prompt responses. I have Nikon D810 and Wondow7 on my computer.

At Imaging, the bulb shutter keeps aborting after first image downloading.

Also, when I ran slow shutter speed at specific exposures, the captures keeps going non-stop until aborting.

I have no problem at all with trial version.

[admin]

9 minutes ago, daravuthseng said:

Thanks for your prompt responses. I have Nikon D810 and Wondow7 on my computer.

At Imaging, the bulb shutter keeps aborting after first image downloading.

Also, when I ran slow shutter speed at specific exposures, the captures keeps going non-stop until aborting.

I have no problem at all with trial version.

Why are your posting this again, it's your original post?

[daravuthseng]

Could you delete it. I don't know why? I am new to this..Sorry!

[admin]

2 hours ago, daravuthseng said:

Could you delete it. I don't know why? I am new to this..Sorry!

oh... okay.  I'll leave it there, no harm done.  I was just confused when I saw a post identical to the original post and I did not know if this was a new question or not.

All is fine

[vbagwell]

I'm having a similar issue as daravuthseng.  I also use a Nikon 810a with BYN 2.0.9.  Nikon firmware version C = 1.02.  L = 2.009.  The 810a release mode dial is set to S - single frame, and exposure mode is set to Manual, Bulb.  BYN is set to Imaging mode.  I can connect fine.  In the capture center, I have (5) five 1-sec exposures, set to Bulb, with a 5 sec pause.  BYN takes the first image fine and aborts after that.  Log file attached. 

logfile-[20180701-13h14m53s057]-[3016]-2018-07-01.txt

[admin]

2 hours ago, vbagwell said:

I'm having a similar issue as daravuthseng.  I also use a Nikon 810a with BYN 2.0.9.  Nikon firmware version C = 1.02.  L = 2.009.  The 810a release mode dial is set to S - single frame, and exposure mode is set to Manual, Bulb.  BYN is set to Imaging mode.  I can connect fine.  In the capture center, I have (5) five 1-sec exposures, set to Bulb, with a 5 sec pause.  BYN takes the first image fine and aborts after that.  Log file attached. 

logfile-[20180701-13h14m53s057]-[3016]-2018-07-01.txt

Please start a new thread int he future.  You're issue is not the same.

You need to set bulb manually on some camera models... and I think this is the case for the D810.  You should have a bulb ( or B ) setting on the top left dial od the camera itself.  If yes you need to set it to bulb.

Keep us posted. 

[vbagwell]

Starting new thread. - vbagwell