How do you adjust the focus in BYN?

[billd]

In the Frame and Focus window, its not clear how I actually adjust the focus.  I'm assuming I don't have to touch the camera or lens (that would start things shaking for a while) but can do it from BYN - the way Nikon Camera Control 2 has buttons to bump the focus near and far.  Please tell me where these controls are - or whether I actually do have to physically turn the focus ring on the lens to do this.   

[astroman133]

For a Nikon camera you have to manually turn the focus ring to focus your lens.

[admin]

And if you have a motorized focuser with an ASCOM driver you need to connect your ASCOM focuser to BYE (premium version only) and then you can control your focuser from BYE.

[billd]

That's a bummer.  Nikon focus can be adjusted over the USB cable - and is by Nikon Camera Control 2.  Hopefully a future version of BYN will allow this.

[admin]

That's a bummer.  Nikon focus can be adjusted over the USB cable - and is by Nikon Camera Control 2.  Hopefully a future version of BYN will allow this.

 

Most likely will.

 

Regards,