Is the Canon T6i compatible with BYEOS?

[RaySOCA]

I read over the list of Canon cameras compatible with BYEOS and saw the Canon T6s, but did not see the Canon T6i, which is the camera I have.  Will BYEOS work with the Canon T6i camera?

 

Sincerely Ray

[diegovilar]

Hi Diego,

 

Yes please do, the SDK is out for this model so all I need is those numbers and I should be able to make it work.

 

Just tried v3.1.8 with the T6i and got this on the log:

 

18:16:19  Attempting to connect camera...

18:16:19  Canon drivers 'Canon\' initialized.

18:16:22  750D-T6i CONNECTED!

 

But, for starters, the selected dial option shown on BackyardEOS doesn't match the actual dial selection on the camera (ie M on the camera is shown as CA in BEOS). Things don't work as expected.

 

I can't find the pattern and numbers you mentioned. v3.1.7 doesn't show it either. How can I help?

[admin]

The T6i is supported with 3.1.8, I have several users using it already.  No need to send these number as it is supported in 3.1.8 already.

 

What do you mean it does not work?  Be more specific.

 

Regards,

[admin]

Oh, you you 100% sure your camera dial is set to M?

[admin]

Try 3.1.7 and if you get numbers in the message center like the following post them here.  i should be able to make it work with these numbers.

 

07:05:27 DEVICEINFO DESCRIPTION IS Canon EOS T6s 

07:05:27 DEVICEINFO NUMBER IS #########. 

07:05:27 YOUR *REAL* MODEL NUMBER IS ##########(#########) 

[lumenmikie]

A little off-topic, but I noticed that 3.1.7 supports the EOS 80D. I bought a 80D last month and the previous version of BEOS didn't connect with that camera. I have now  verified that the new BEOS now works with it. Thank you for being prompt with adding the support when the Canon SDK became available.

Regards

Mike Hayford

[diegovilar]

Can you provide me with these numbers? Without them can not support your camera,  With them I can support your camera within 24 hours.

 

Regards,

 

I'll be getting a T6i for xmas, and I'm very interested on BYEOS supporting it. So if nobody sends you those numbers by then, I'll be happy to do it.

 

Regards

Diego

[admin]

Hi Diego,

 

Yes please do, the SDK is out for this model so all I need is those numbers and I should be able to make it work.

[admin]

 

Try 3.1.7 and if you get numbers in the message center like the following post them here.  i should be able to make it work with these numbers.

 

07:05:27 DEVICEINFO DESCRIPTION IS Canon EOS T6s 

07:05:27 DEVICEINFO NUMBER IS #########. 

07:05:27 YOUR *REAL* MODEL NUMBER IS ##########(#########) 

 

 

Can you provide me with these numbers? Without them can not support your camera,  With them I can support your camera within 24 hours.

 

Regards,