Be as specific as possible when reporting issues and *ALWAYS* include the full version number of the application you are using and your exact *CAMERA MODEL*
NEVER POST YOUR KEY IN ANY PUBLIC FORUM, INCLUDING THE O'TELESCOPE SUPPORT FORUM ::: IF YOU DO YOUR KEY WILL BE DEACTIVATED WITHOUT NOTICE!
Have Nikon D40 set up with serial cable to D40 and Shoe string DSUSB IR with IR sensor velcro taped just below IR sensor. I can achieve connection and fire Nikon D40 (hear shutter click)with IR when non bulb setting is used (<60 seconds), when I select Bulb mode, Shoe string DSUSB shows green light but BYNikon just times out after exposure period with shutter click observed. Can you assist is there some other setting on the camera I need to select. I am on Manual, with cable support to DSUSB-D40. I notice that when I do not select the remote IR camera setting on the camera the camera shows "bulb" on the screen, but when I select the remote control setting - the camera then displays " - -"
Link to comment
Share on other sites
2 answers to this question
This topic is now archived and is closed to further replies.