Time out during capture plan

[dexter2317]

Let me start by saying I am a beginner and have only used BYN 3x now. The first 2x I was able to connect my camera (Nikon d750) and execute a capture plan without a problem. The software is very intuitive! But this last time I connected the camera successfully, executed a capture plan (very short maybe 10 exposures with short durations) and the software timed out after the second or third exposure. I rebooted and tried several times but kept having the same problem. Not sure if this is relevant, but I'm running windows 10. I'm going to a star party on feb 8 and I really would like to get this resolved. Thanks so much!!

[admin]

Hi,

 

Please send me the log files.  I need to see the exact error.

 

Regards,

[dexter2317]

Attached are the log files from my failed session. Thanks you so much for your help!

 

Debbie

logfile-20160107-20h18m29s841-5236-2016-01-07.zip

[admin]

Hi,

 

Thank you for the log files.  

 

Are these BULB images?

 

Do you have in-camera dark subtraction enabled?

 

Thank you

[dexter2317]

Honestly I cant remember if they were bulb or not. They were all less than a min, most 15-20s. I just checked the settings on the camera which haven't been changed since I used it last and the Long Exposure NR was off. Is this the setting you are referring to?

[admin]

Yes that was the setting, good, it is off.

 

Please make sure you try BULB the next time.  I think the issue is only related to non-BULB images. According to the log files they were not BULB images... but I need confirmation. 

 

Thank you.

[dexter2317]

Hopefully I can give it a try this weekend before I leave. I hope this is the answer cause that will be an easy fix! I'll let you.

 

Thanks again!